Project 67mm build for a redneck

[JeremyH]

 

[jeffie on juice]

thank you i bought the one off ebay and ordered the hoses through ford today

 

[rford426]

How much were the hoses? Gonna stop by tomm just oredered the other one he had haha

 

[jeffie on juice]

i put them on my napa account then i will charge them to a fleet customer in a week or 2

i will ask the guy tomorrow for a invoice and let u know part ## if u want just use my account through ford

 

[rford426]

Well put another set on there I'll pay shipping!

 

[jeffie on juice]

Question the metal hose some of u guys are running who makes those??? I would love to have that.

And rford426 whats going on with that 76mm turbo that fedex lost???

 

[JeremyH]

Question the metal hose some of u guys are running who makes those??? I would love to have that.

And rford426 whats going on with that 76mm turbo that fedex lost???

Mine came with my on3 kit, its just a 1.5" j pipe, you can get it cheap on ebay and make your own like willy did.

 

[jeffie on juice]

how much were the hoses? Gonna stop by tomm just oredered the other one he had haha

upper hose my cost is 22 bucks
lower hose is 44 my cost

 

[jeffie on juice]

Stupid question got my hoses from ford i guess with the new 07 cross over the thermostat is built into that ???


FORD OEM PART # UPPER HOSE IS 7R3Z-8260-BA MY COST 23.99 LIST 42.64
FORD OEM PART # LOWER HOSE IS 7R3Z-8286-C MY COST 47.54 LIST 84.51

 

[JeremyH]

Yeap the tstat goes in the crossover.

 

[Fallenauthority]

Yea, the t-stat is built into the crossover. They shouldve just done that from the start with 05-06, our design was retarded with the t-stat in the lower hose right in the middle of everything

 

[jeffie on juice]

Question i just installed the GT500 fuel pumps and harness
now i am install the KB BAP ,

1.question is do i still tap into the white wire on the drivers side harness??????

2. the 2 small wires that active the bap by boost i just connect them together ???

please and thank you people i need help

 

[one eyed willy]

and the 2 small wires that active the bap by boost i just connect them together ???

yes

 

[jeffie on juice]

what about question 1 ????

 

[one eyed willy]

what about question 1 ????

are you wiring up a dual BAP or single?

 

[jeffie on juice]

single

 

[one eyed willy]

im not sure on doing a single on dual pumps........only time i installed a BAP was on stock pumps and wiring. i thought for gt500 pumps you would needs a dual BAP.....it has to be wired to both fuel drivers.

 

[jeffie on juice]

god DAM it this build is killing me

 

[JeremyH]

If your using a single bap, you need at least a 40amp model, and then you have to split the output of the bap to each fpdm wire white/red. On the gt500 setup each fpdm controls a pump so if you only hook the bap output to one fpdm, then only one pump is getting more voltage.

 

[AbdullaGT500]

How much power are you planning on making? If you're not running much boost you won't need a bap.