Rear LCA question

[Darkside323]

Sooo..... This weekend I've been doing some rear suspension work. Installing a whiteline watts, BMR relocation brackets, and Ford Racing FR 500s LCA's. The watts install was going great until the center left bolt on the main brace stripped. Gonna call whiteline tomorrow and see if they can help me out.
On the LCA's the rear mounting point has an offset. Research revealed that this is normal and to replicate the form of the stock arms. Well my stock arms seem to both have the greater offset on the right side. I could be seeing things which is why I would like some clarification. On the rear mounting point of the LCA does the greater offset need to be facing the inside of the car, the outside, or both on the right side?
Thanks in advance for some info.

 

[Darkside323]

The arms are ford racing M 5649 R1

 

[BMR Tech]

Offset faces inside. This pushes the LCA closer to the wheel.

 

[Vorshlag-Fair]

Call your WL dealer to see if they have the Watts parts you need in stock.

 

[Darkside323]

Thank you very much for the info

 

[Darkside323]

One more question by offset do you mean the side with a greater left right width faces the inside or vice versa.

 

[19COBRA93]

One more question by offset do you mean the side with a greater left right width faces the inside or vice versa.

Please excuse the extremely crude drawing, but hopefully this helps:

 

[Darkside323]

Awesome drawing thanks. A pic is worth a thousand words!!!! I Googled images and only found one that clarified my questionstion. Thanks!!!!