Well i got my beast back from AED. I have to give another Huge thanks To Drew an Shaun at AED for taking Great care of my car. Its was a little bit of a project but came out super sweet an made great power. I had them convert my GT500 to be able to run E85 safely an boy did it make some great power. theres a few things they had to do that we ran into problems, one we had to go with Fore fuel rails because we needed to run a line from the rail to the E85 Sensor for the Analylzer and could not get the stock rail to do that, 2nd when tuning started we were maxing out the stock pumps an 80lb injectors even with the KB BAP 17V, so we had to send off the stock fuel pump setup to pauls HP an have them install upgraded dual 310LPH pumps. while we were waiting on those parts to come i ordered Metco Drive Shaft Safety loops from Valaya Automotive (thanks Elliot) had them Shipped to AED an Drew installed it, Drew Also Welded my CHE Relo Brackets and Fixed my issue with the Shelby Heat Exchanger fans not kicking on anymore(bad Trigger wire). Drew also did a super sweet job installing all the fuel lines, Rails, Senors, an analzyer also made an adapter on a fuel hose so i can attach it to the fuel rail an set a tune to pump out all fuel when switching from E85 to 91oct . when all that was Done the Car was Taken over by the great Man Shaun were tunning was finalized an he did a great job. the car now makes 736HP an 699.9TQ with Timming at 24degeers an the fuel pumps an 80lb injectors running at 90% at WOT at that HP. once Again Big Thanks to Drew an Shaun at AED.
here are some pics enjoy
here are some pics enjoy