What's everyone's 60 foot and setup?

[09gt3v]

Just looking to see what everyone cuts the other night I span terrible and instantly blew the tires off best for the 60 was a 2.2 and that pass was a 13.1 at 109 car has alot more in it so I'm just trying to see what I have to look forward too

 

[DVEST8R]

1.53, auto, stock converter, uca,lca's

 

[ford20]

Here you go

http://www.s197forum.com/forum/showthread.php?t=32593

 

[drive_55_not]

Just looking to see what everyone cuts the other night I span terrible and instantly blew the tires off best for the 60 was a 2.2 and that pass was a 13.1 at 109 car has alot more in it so I'm just trying to see what I have to look forward too

What mods do you have that let you trap 109?

I cut a 1.53 yesterday with 540-lbs-rwtq and launching @5000,, 4.56 gears, 28x10.5x17 Hoosier slicks, and a new clutch .


.

 

[dysan]

Last Sunday I managed a 1.43 60' but the fuse blew on my BAP so the car shut down well before the 1/8 mile so I don't have a time for the run. After that I turned the boost down and was cutting consistent 1.47 60's with 10.4x runs at 131-132mph.

I have M&H 325/50/15 drag radials, stock shocks and springs, single drag airbag in the passenger side at 10psi, CHE LCA relo brackets, J&M street extreme LCA's, JPC race UCA mounted to a UPR UCA mount and a prothane bushing on the top of the diff.

 

[09gt3v]

I have Preety much every engine bolt on, hot rods, ford racing intake, only thing I'm lacking is gears I'm thinking 430's on the gears, I had a brand new set of 555r nitto drag radials on and didn't hook for shit even span goin into 3rd

 

[skwerl]

Nittos are horrid track tires IMO. When I first started drag racing my car I bought a used set of Nitto 555r tires and Race Star wheels. Used them for 2 weeks and ordered a set of Mickey Thompson ET Streets from AM. I ended up cutting a best 1.63 short time with those Mickeys.

 

[808muscle]

Yeah you need better tires. Get some Mickeys.

 

[09gt3v]

Yea I think I need to grab a set because me and my buddy both have similar setups and he had the same issues as me with them there is no dumping them, I came out on the clutch that was the only way I could even leave the line period

 

[Boss281]

1.5s all day long. ET Streets, BMR xtreme antiroll bar, QA1 adjustable shocks, other assorted suspension parts from BMR.

 

[itsslow06]

1.9 street tires, stock suspension.... Got lowers now and an upper so hopefully they help

 

[BMR Tech]

Full BMR Suspension.

1.61 with Bolt-Ons / N/A - 265/40-18

1.49 with Nitrous - 265/40-18

1.49 with VMP TVS - 275/60-15

More better short times coming soon. Much more better.

 

[GT.350-R]

Mine suck cause I use BMR suspension.

Just kidding, I need more power! 1.63 with a stock 3 valve.

 

[Sharad]

I have Preety much every engine bolt on, hot rods, ford racing intake, only thing I'm lacking is gears I'm thinking 430's on the gears, I had a brand new set of 555r nitto drag radials on and didn't hook for shit even span goin into 3rd

You just need some suspension upgrades and stickier tires. What size are your rear wheels?

UPR's 2010 GT 3V pulls 1.35 60-foot times on UPR street suspension and drag radials.

 

[BMR Tech]

UPR's 2010 GT 3V pulls 1.35 60-foot times on UPR street suspension and drag radials.

 

[Sharad]

Let me know whenever Al's ready to get spanked. BMR's Boosted Coyote vs UPR's Boosted Coyote. We're on UPR street suspension and 275 DRs.

[DISCLAIMER]Kelly and I are friends. This is friendly banter, not two shops going for each others' throats.

 

[BMR Tech]

Boost for boost?

 

[BMR Tech]

Sharad, are you guys going to race at the NMRA Atlanta race?

 

[09gt3v]

I have zero suspension as of right now just picked up lca's still gotta get the relocation brackets and a brand new set of 555r nittos on 18's

 

[Sharad]

Boost for boost?

You know the car has an NLR boost controller, right? I think Jeremy plays with the boost controller in the staging lanes just to stay entertained. Who knows what boost he runs? Either way, pound for pound wouldn't be fair for you. (Turbo efficiency vs TVS efficiency)

Sharad, are you guys going to race at the NMRA Atlanta race?

Not sure what the plans are. I'll ask Mark tomorrow. I've been trying to get them to do that Coyote Shootout in Ohio. Granted, our 4000lb pooch would be like bringing a knife to a gunfight, but racing's fun, right?! Anyway, I'll lean on Mark a little and tell him we need to do a UPR vs BMR match race. I'll let you know what he says.