Which Chin spoiler should I get?

[Kbreeze]

I feel like I need a chin spoiler to complete the look, but don't want to worry to much about scraping. Was considering this one here:
http://www.americanmuscle.com/cs-boss-lower-fascia-gt.html
Opinions?

 

[Wicked GT]

Once I have a few nickels to rub together that is the exact setup I am going with for the lower...

 

[344Saleen]

I like that one, Ive been looking for something different (I have a black '11 gt) but I don't really see much else out there, thats priced decently.

CDC and RTR splitter looks nice but at $400 is more than Im looking to spend

http://www.americanmuscle.com/rtr-chin-spoiler-1012.html

 

[BleedinBlue]

Can't go wrong with that CS/Boss fascia. Sure it's done quite a bit, but it's done quite a bit for a reason. Still looks better than probably all of the other options that don't require a new bumper, IMHO.

 

[JEWC_Motorsports]

You won't scrape.

 

[Kbreeze]

Thanks for the feedback I think that's the one ill go with. Is the install do it yourself or best to take it to a body shop?

Sent from my SGH-T999 using Tapatalk 2

 

[ZPounds09GT]

Install should be do it yourself (with a partner for added leverage). Me and my friend put on the RTR Rear Deffuser on his car and it was a little difficult to get some of the pins in without the others popping out so an extra hand could probably help.

IMO the Boss Splitter needs to be added to that CS lower though because it looks unfinished without it. Like something is missing.

 

[JEWC_Motorsports]

Install is a breeze....

 

[Kbreeze]

Install is a breeze....

Are you serious or was that a play on my name?

 

[BleedinBlue]

Are you serious or was that a play on my name?

I'm betting it was both.

Good choice. Get that on, go with a Saleen or similar grill and your front end will be smokin.

 

[whtcanbrwnd04u]

Install is easy. I've had mine apart numerous times now.

Takes 10 mins to get the bumper off, another 10 to put the new fascia in. Very straight forward.

 

[Kbreeze]

Install is easy. I've had mine apart numerous times now.

Takes 10 mins to get the bumper off, another 10 to put the new fascia in. Very straight forward.

So you are saying 20 mins, but their install guide says 3 hours!? And what's up with this tool list? Band saw? Toluene or lacker thinner? tin snips? rivet gun? clip remover tool? Christmas tree clip puller? wtf is that? 90 degree angle screw gun attachment? wtf is that? Air or electric drill motor? huh? And masking tape? why?

Tools Required

• 10mm SOCKET
• 5.5mm SOCKET
• PHILIPS SCREW TIP
• 90 DEGREE ANGLE SCREW GUN ATTACHMENT
• CHRISTMAS TREE CLIP PULLER
• CLEAN WIPING CLOTHS
• AIR OR ELECTRIC DRILL MOTOR
• 1/8” DRILL BIT
• 7/16 DEEP WELL SOCKET
• 3/8” RATCHET
• TIN SNIPS
• BAND SAW or SABAR SAW
• 10mm SOCKET –RATCHET
• 5mm SOCKET – RATCHET
• CLIP REMOVER TOOL
• SCREW GUN with PHILIPS TIP
• TIN SNIPS
• GREASE PENCIL- CHINA MARKER
• CLIP REMOVER TOOL
• 11mm SOCKET & RATCHET
• PHILLIPS HEAD SCREWDRIVER
• 3/8” DRILL BIT
• RIVET GUN
• TOLUENE OR LACQUER THINNER
• CLEAN SOFT RAG
• MASKING TAPE 2”
• PLASTIC 4” SQUEEGE

Installation Time: 3 Hours

 

[06z28eater]

I installed mine without removing the front bumper. Your first time it will probably take an hour to do that boss valance. Simple.

 

[Mystickeith50]

I would get that. It totally changes the look and I think looks great on my car. The install is very very easy. I did it in literally 40 minutes tops in my garage.

 

[ford20]

Well I didn't think I would see one of these threads here without the OP getting some shit for it lol

 

[Kbreeze]

I would get that. It totally changes the look and I think looks great on my car. The install is very very easy. I did it in literally 40 minutes tops in my garage.

what's with the tools list than? Is it some kind of AM joke? lol

 

[JEWC_Motorsports]

A couple sockets, screwdriver, and pliers for the boss fascia. Need a drill and drill bits for the lip.

 

[Mystickeith50]

If u are talking about just getting the front fascia it is really a quick install. If u are adding the boss splitter then u need to drill and stuff. But if I'm reading your post right and ur just installing the lower fascia there is no way it will take u 3 hours. It took me three hours to do my front fascia, gt500 rear fascia, n roush side splitters.

 

[Kbreeze]

Did you go with the splitter too or just the fascia? And do they come with step by step instructions?

Sent from my SGH-T999 using Tapatalk 2

 

[JEWC_Motorsports]

I had both on my car at one time and yes it comes with detailed instructions.