WTB 8.8 rear (05+)

[Liftedbronco]

lemme know if either

A. sell me what you have (stock or modded ok)
B. Shop can make me something custom

 

[dabad1]

rearend

you got a pm

 

[STEVE_POE]

I have a brand new takeout for $450 plus shipping 331 gear

 

[Liftedbronco]

Steve,

Any chance of you putting a diff and gears in it at my expense? Or perhaps also narrowing it?

 

[STEVE_POE]

I can put a gear and diff in it for $125 . you send me the parts and I'll send it done. nothing on narrowing it and that install price is not for a eced diff either

 

[Liftedbronco]

heh...you are getting to know me.
would you do the ected for more? or not looking to get into that one? That is absolutley what I was looking for. Definitley having some trouble making it happen.

Thanks Steve.

 

[STEVE_POE]

I'd do it, it's just more work . you have to drill a hole down through the housing for the wires and just overall more work needing to be done. But yes I can do it.

 

[Liftedbronco]

Great, then lets do it.

I will order all the parts. Would it make sense to have them shipped right to you? Or does it make things easier to just send it to you from me all in one box?

Do you need a deposit or anything to lay my claim to this? Ill order it all 2nite.

 

[STEVE_POE]

you need to let me know what exactly your looking to buy for this housing. keep in mind it's going to be 100-120 to ship this axle to you when I'm done with it.

we are going to need a crush ring, nut and a shim kit . I can ship it without gear oil and you can put it in . get a new gear if you don't want it to make noise.

pay me for the axle then send me the parts . when I'm done you can pay for shipping and the install.

 

[STEVE_POE]

it will be done to one of these axles that I have

 

[STEVE_POE]

make sure you call greg at md to check pricing as that can save you on some shipping costs if he can get what you want .

513-200-4077 tell him I told to call you .

Steve Poe

 

[Liftedbronco]

diff http://www.jegs.com/i/Auburn+Gear/109/545002/10002/-1
cover http://www.jegs.com/i/Ford-Racing/397/M-4033-G2/10002/-1?parentProductId=753060
installation kit (hardware) http://www.jegs.com/i/Ford-Racing/397/M-4210-A/10002/-1?parentProductId=763016
gears http://www.jegs.com/i/Ford-Racing/397/M-4209-F373N/10002/-1?parentProductId=748340#moreDetails

Is that all satisfactory? Did I leave anything out?

EDIT - just saw your last reply. ill try calling him tomorrow. So he would send the stuff right to your shop im assuming?

 

[STEVE_POE]

looks right . do yourself a favor call greg..

ship to my office if you don't call him.

temco
c/o steve poe
112 commerce blvd
loveland ohio 45140

 

[STEVE_POE]

I've got a nice set of moser axles for that diff I will sell for $250 if you want them.

 

[Liftedbronco]

deal. i wanted axles...but i didnt want to push you too much. I know your not in business to rebuild axles.

Last thing - Do you have a system for getting that rubber bushing out of the housing? Ive got a poly one for it. Its a PITA no doubt.

 

[STEVE_POE]

deal. i wanted axles...but i didnt want to push you too much. I know your not in business to rebuild axles.

Last thing - Do you have a system for getting that rubber bushing out of the housing? Ive got a poly one for it. Its a PITA no doubt.

Yup, I run the steeda one in the race car

 

[theenthusiast.us]

somebody pick up the phone!!!!!