Search results for query: *

  1. S

    Best way to test fuel pumps?

    I'm having fuel pressure issues at WOT pressure holds around 50 psi then as the rpms start climbing it dropped down to the 30s. I'm running a JPC racing triple pump return style fuel system with 3 walbro 465 pumps and a fore FC3, I disconnected all 3 pumps and connected one by one and turned the...
  2. S

    Fuel pressure drop at WOT

    Last night I was out getting a log in and planned to go from 2000-6000 rpm. I went ahead and started the pull and around 4800 rpms I loose fuel pressure down to low 30s and even dippes into the 17 psi range and the car leaned out hard AFRs shot up into the 13s so I caught it and shut down right...
  3. S

    Running an air to water intercooler

    I'm still running the procharger stage 2 intercooler that came with the kit originally and I'm sure maxed out, I need to upgrade and I've been looking into going to an a/w setup also. I has an F1C being spun pretty hard (80k+rpms) on the built 3 valve 10.0:1 blower cams, stock heads, jpc...
  4. S

    10 point cage

    I'm dropping off the car Tuesday it's going in for a 10 point cage certified for 8.50's. I'm trying to figure the best way on going thru the dash or if it's possible just looping around the dash I've seen done on a few cars. So what I'm asking is what's the best route to go it? Running the cage...
  5. S

    replacing old tires

    Iv had nitto 555s up front since 2010 and m&h drag radials out back since 2013 I think, the nittos up front have about 15k on them still like new and the drag radials have about 1500 miles and 5 passes on them. The car has been sitting for a while now and it's just about done and ready to come...
  6. S

    flex plate for th400 swap?

    Need help finding a flex plate for a TH400 swap on my 3 valve 8 bolt. I bought everything from rossler when I called them then sent me to jw and they have been sending me the same one 3 times and it's not lining up. So I need to try a different one, anybody have a part number or another kind of...
  7. S

    procharger fitment issue's

    I'm not sure if this is tech or not move it if it is, but anyways I just sent off my F1A out to procharger to upgrade to an F1C. While pulling it off I noticed there's really not much room at all of clearance from the blower to the valve cover. The F1A housing is 9" vs the f1c 9.75" so I'm...
  8. S

    a few questions when doing a th400 swap.

    Well my th400 from rossler will finally ship this week and iv been thinking doing the swap myself with a buddy. I ordered a couple there things went with the tci outlaw shifter, evolution cross member, b&m tranny cooler w/fan, the driveshaft will be built local. So iv been looking up as much...
  9. S

    Cobalt oil pressure Guage install, Guage on dash not working

    I had a shop install my oil pressure Guage a couple weeks ago and now my oil pressure Guage don't work. What can I do to make them both work? I need my car to pass emissions and they won't even test it with the Guage not working. Now I no I can go buy a oem sensor and have it work again but I...
  10. S

    water/meth injection and a few other things.

    So iv been thinking of running a meth kit on my car, iv been reading up and have heard I don't need it since I'm running E85 but I haven't really found the right answer, my setup is an 05 get stroked out to a 302 10.0:1 ported heads, 127550 cams, jpc racing intake and a cog driven F1A at 19...
  11. S

    weld RTS vs bogarts D10

    I'm not 100% sure if this is where I should post this so just move it if it's not. I need to order my drag wheel setup this week and I'm stuck between the RTS and the bogarts, I priced them out and they are really close with tires too so cost is not an issue. Only thing I heard about the...
  12. S

    hood pins

    I just picked up 3" cowl hood from American muscle And iv been looking around for good set of hood pins and saw these Www.aerocatch.com I was just wondering if anybody has used these? I'm looking to ordering something by tomorrow
  13. S

    turbo kit options?

    I have a buddy that just picked up an 06 gt completely stock with an auto and is looking to throw some boost at it here soon. He wants to go with a turbo setup and I'm not too familiar with them but I know of a couple turbo kits like powerhouse, hellion, on 3, s & h, but that's about it, any...
  14. S

    3" exhaust?

    Iv been reading up on a few threads here and a couple other forums about exhaust setups and when they start to become a restriction, right now I have the jba long tubes with o/r h pipe and magna packs all 2.5" and im laying down 830 whp on my 05 gt with an f1a. The car will be back on the dyno...
  15. S

    After WOT run car won't run, with really rough idle

    I just took the car out today and decided to go out and do a couple WOT pulls in it since I haven't drove it in a month so as I'm coming home I decided to go full throttle in 3rd gear one more time I hit 6500 rpms and shut her down well when the rpms came back down the rpms dropped to 400-500...
  16. S

    running nitrous on top of boost?

    I want to run a small shot of nitrous to help out with the low end on my 3 valve, right now I'm making 830 whp at 6700 rpm @ 22 psi and the f1a is will be maxed out its spinning at 67000 rpms right now and at 7200 rpm the impeller will be spinning at 74550 rpm which is the max u can spin it, I'm...
  17. S

    New dyno numbers on the F1A on e85

    Just picked up the car at RWR were it was getting the throttle body installed and and some work on the fuel system and retuned, they car laid down 691 whp at 6000 rpm on 13 degrees and 19 psi last year that was on the break in tune, took it up to 6500 rpm and put down 775 whp, he started taking...
  18. S

    What to expect going from manual to auto

    Well Next month I will be replacing the 3650 with probably a th400, IV been doing a lot of research on what transmission would work best with my setup. I was stuck between the 4r70w and the th400 or stay manual and go with the magnum xl 6 speed. I decided if I went auto the th400 would work for...
  19. S

    looking on buying some parts tomorrow.

    so im gunna be dropping off the mustang at the shop sat morning to get it retuned. I was talking to the guy tuning it and he said it would be a good idea to throw a throttle body on it so he could set it up right. I told him I would order a ford racing twin 62mm Monday but he said to go with a...
  20. S

    cobalt gauge install help

    I'm switching over from my autometer procharger boost and fuel pressure gauge to the cobalts, I'm pretty new to wiring and I only watched when they installed my old guages, so the procharger fuel gauge is kinda the same the cobalt gauge has 3 wires and the procharger just had 2. black for the...
  21. S

    What wideband you guys running?

    I'm planning on swapping out my auto meter procharger guages with new cobalt ones boost and fuel pressure, And I need to pick up a wideband while I'm at it which is the best one out there?
  22. S

    running nitrous with the F1A?

    Iv been thinking of running a small shot of nitrous on top of my f1a for next near, IV been doing some research but not really answered my questions. Right now I'm at 18-19 psi at 6000 rpm on e85 with 13 degrees of timing, and next spring I plan on taking it up to 7500 rpm on the same pulley so...
  23. S

    first time out with drag radials

    I finally picked up my m&h racemasters 325/40/18's d/r's and I'm gunna try them out on Sat at the track, my old tires were the nitto 555s 295/45's and I had to pretty much leave off of idle to not spin so much even with a 2nd gear burnout 17 psi on the rears, my best pass so far is 12.5 with a...
  24. S

    05 gt wont crank over, fuel coming out of exaust

    My car has a 302 stroker motor, 10.0:1, f1a, cams, heads, jpc racing tripple pump return fuel system with id1000 injectors on e85, I got in my car this morning and it wouldn't crank over, I tried for about 5 minutes and no go then it just started smelling like e85 so I go behind the car and find...
  25. S

    building up the rear end?

    So iv been waiting to get my car out of the shop finally to start working on the 8.8, iv been doin research the last couple months but couldn't find what I was looking for. The cars making just shy of 700 rwhp and about 610 rwtq but we will be turning it up once I get the 4r70w this fall, so I...

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Sponsor Links

Banner image
Back
Top