Is this the correct ARP crank bolt ??

[Dark_horse]

Is this the ARP crank bolt for the kellog stroker crank to use with my ATI Super Damper? I have read that it takes a longer ARP bolt and it was a mini cooper part number...

ARP 206-1001

Now does anyone know if a retailer has these in stock ready to ship... jegs, summit, and all the major ones say wont ship until the 18/19 and I really don't feel like waiting that long... guess I could get by with an oem bolt until one came in and since im turbo it wont put the extra strain from blower application on the crank...

Let me know if im on the right track here...

Thanks

 

[tmcolegr]

That's the part# JDM recommended to me and I installed on my build with that combination. No one had it in stock other than ARP. Took about a week to get from ARP. Could have received it sooner but I was to cheap to pay any thing other than ground freight

 

[Scott]

That is the part number I used as well. Post # 125 in my build thread.

http://www.s197forum.com/forum/showthread.php?t=91539&page=7

 

[Department Of Boost]

This is the one I used. It may not be the “right” one but it has a lot more thread engagement than needed (1.5x the diameter is considered minimum thread engagement) and hasn’t had a failure despite the fact that I rev the crap out of my motor and bounce of the rev limiter constantly.


http://www.summitracing.com/parts/arp-156-2501?seid=srese1&gclid=COqg5Oj87bgCFcU7MgodNUMAhA

 

[Dark_horse]

This is the one I used. It may not be the “right” one but it has a lot more thread engagement than needed (1.5x the diameter is considered minimum thread engagement) and hasn’t had a failure despite the fact that I rev the crap out of my motor and bounce of the rev limiter constantly.


http://www.summitracing.com/parts/arp-156-2501?seid=srese1&gclid=COqg5Oj87bgCFcU7MgodNUMAhA

This is the one I ended up ordering...

 

[GTGHOST]

the bolt that you looked up is correct...its a MINI Cooper cam phaser bolt if i recall...works great..

i have the right part number written down somewhere with correspondence from Innovators west (they get it from us at Fastenal) , who sends you the bolt with it, its the same at ATI - that is if you dont want to pay the ARP premium and want the same bolt...

 

[michael.konor]

So, that Mini Cooper bolt is usable as a replacement for out phaser bolt, or the caps? The picture on Summit is worthless...

 

[Dark_horse]

So, that Mini Cooper bolt is usable as a replacement for out phaser bolt, or the caps? The picture on Summit is worthless...

Crank bolt

 

[Scott]

For a comparison of the OEM and ARP crankshaft bolts see post number 294 in Todd's (tmcolegr) build thread.

http://www.s197forum.com/forum/showthread.php?t=20941&page=15

 

[michael.konor]

Crank bolt

I figured. At least I found one of the 4.6 bolts (ARP 206-1001) on Amazon for $28 shipped.

 

[rayS197]

I just picked up an ATI balancer. I see Scott and Todd used the 206-1001 mini cooper bolt with their Kellog crank. The FRPP uses the Eagle crank. What bolt should I use with the Eagle crank??