I made several on these fittings to do a Valve Spring Swap, they worked flawlessly, I tightened the fitting into the Spark Plug Hole, connected an air Hose and went to town replacing springs.
No worries, 90 PSI kept the Valves in place while I replaced the Springs.
$15.00 Shipped.
I have 2 of the full size fittings ( these allows for a better seal when tightened)
ALL Threads are sealed with JB Weld to ensure they do not come loose (Also the Spark Plug casing is threaded to the pipe)
I tried to undo a test unit in a vise using a long bar, using my weight on it and the threads never let loose. "I twisted the brass pipe" but the threads never budged.
the third one will allow you to use your own fittings and air hose
$10.00 Shipped
No worries, 90 PSI kept the Valves in place while I replaced the Springs.
$15.00 Shipped.
I have 2 of the full size fittings ( these allows for a better seal when tightened)
ALL Threads are sealed with JB Weld to ensure they do not come loose (Also the Spark Plug casing is threaded to the pipe)
I tried to undo a test unit in a vise using a long bar, using my weight on it and the threads never let loose. "I twisted the brass pipe" but the threads never budged.
the third one will allow you to use your own fittings and air hose
$10.00 Shipped
Last edited: