C
CapaldiPartsGuy
Guest
I have about 95% of what you need to put a GT500 face on your base model mustang.
What you get for your money....
(1) GT500 front fascia. The fascia has never seen the street and the plastic itself is in perfect condition. I don't even think this fascia was ever installed on a car. The paint has blemishes and scratches from being handled. Your painter will not have to do anything special to paint the part. It has a factory paint job on it right now.
7R3Z-17K945-AA, 1, Grille, lower NEW
7R3Z-8200-A, 1, Grille, radiator NEW w/ emblem
7R3Z-8B455-A, 1, Bracket NEW
7R3Z-8B455-B, 1, Bracket NEW
7R3Z-17626-AB, 1, Lower valence
7R3Z-8C291-AA, 1, Shield NEW
7R3Z-13008-A, 1, Headlamp NEW
7R3Z-13008-B, 1, Headlamp NEW
The above is what you will receive from us in this "kit". Some pieces (below) are missing to make this a complete kit. You can make sure but I think these pieces are readily available from your dealer or alternate sources if you don't mind used.
7R3Z-15200-A, 2, Foglamp These are identical to a Ford escape. You could also get the connectors below from an escape in the bone yard.
7R3Z-14290-EA, 1, Wiring harness (or you can get some connectors from another vehicle and splice.
7R3Z-17C882-A, 1, Isolator (Foam crash reinforcement) Some guys are just adding foam to the GT pad... I can't recommend that for liability reasons but.... You know...
Also, some people think the fender liners are different... I show the same part number for both Shelby and base models.... I don't see a difference. Also, the little bracket that goes in the upper corners of each side is reused off your old fascia. If you want new the dealer has them. Again they are NOT different from base models.
Lastly, most of the hardware can be reused, I understand a couple of bolts and maybe some nuts may be needed. Ill look around here and see if I can come up with them. If I have them I will provide them with the kit for no extra charge.
So... you get all this... almost all you need for the upgrade. $950
I have these parts in stock and ready to ship to you today. Parts are located in our shop in Chesterfield, MI. Pickup is available if you are local.
Shipping. The bumper cant go UPS.... its too big. I can only ship these freight. I have an excellent deal with a trucking company. If you have a commercial address I can ship this for right around $125 (not actual price just a guess). Residential will cost more. I will get a quote for you if you are SERIOUS about buying. Expect shipping to be between $125 and $200.
Feel free to call, pm, or email with any questions or to order this.
Dave
Capaldi Racing
28233 Kehrig
Chesterfield, MI 48047
586-949-7223
What you get for your money....
(1) GT500 front fascia. The fascia has never seen the street and the plastic itself is in perfect condition. I don't even think this fascia was ever installed on a car. The paint has blemishes and scratches from being handled. Your painter will not have to do anything special to paint the part. It has a factory paint job on it right now.
7R3Z-17K945-AA, 1, Grille, lower NEW
7R3Z-8200-A, 1, Grille, radiator NEW w/ emblem
7R3Z-8B455-A, 1, Bracket NEW
7R3Z-8B455-B, 1, Bracket NEW
7R3Z-17626-AB, 1, Lower valence
7R3Z-8C291-AA, 1, Shield NEW
7R3Z-13008-A, 1, Headlamp NEW
7R3Z-13008-B, 1, Headlamp NEW
The above is what you will receive from us in this "kit". Some pieces (below) are missing to make this a complete kit. You can make sure but I think these pieces are readily available from your dealer or alternate sources if you don't mind used.
7R3Z-15200-A, 2, Foglamp These are identical to a Ford escape. You could also get the connectors below from an escape in the bone yard.
7R3Z-14290-EA, 1, Wiring harness (or you can get some connectors from another vehicle and splice.
7R3Z-17C882-A, 1, Isolator (Foam crash reinforcement) Some guys are just adding foam to the GT pad... I can't recommend that for liability reasons but.... You know...
Also, some people think the fender liners are different... I show the same part number for both Shelby and base models.... I don't see a difference. Also, the little bracket that goes in the upper corners of each side is reused off your old fascia. If you want new the dealer has them. Again they are NOT different from base models.
Lastly, most of the hardware can be reused, I understand a couple of bolts and maybe some nuts may be needed. Ill look around here and see if I can come up with them. If I have them I will provide them with the kit for no extra charge.
So... you get all this... almost all you need for the upgrade. $950
I have these parts in stock and ready to ship to you today. Parts are located in our shop in Chesterfield, MI. Pickup is available if you are local.
Shipping. The bumper cant go UPS.... its too big. I can only ship these freight. I have an excellent deal with a trucking company. If you have a commercial address I can ship this for right around $125 (not actual price just a guess). Residential will cost more. I will get a quote for you if you are SERIOUS about buying. Expect shipping to be between $125 and $200.
Feel free to call, pm, or email with any questions or to order this.
Dave
Capaldi Racing
28233 Kehrig
Chesterfield, MI 48047
586-949-7223
