Recent content by Cmarris

The one from exedy, had the same stamping as the OEM one that came out

I forgot to add I also did a exedy lightweight flywheel, maybe that's adding to the noise

I just got done replacing my 05 gt's clutch with a exedy stage 2 with a new slave cylinder and pilot bearing. Everything went back together without a fight and the clutch pedles feels good. The car drives fine, shifts great. The only thing I'm noticing is a some gear noise/whirring coming from...

Still available?

Alright, it is a street car so I will just leave the stock intake on it, what about the frpp throttle body then?

I have a 05 gt manual with longtubes, catless x pipe, cmdp's, airaid intake with 93 tune, hot rod cams, udp's, aluminum driveshaft, 4.10 gears. I was thinking about ordering the Ford racing intake mani and 62mm throttle body and was wondering if it would be worth it with my current mods. I've...

Changing the coils today as well

Prepping my 05 gt for the the track tomorrow and I want to pull the plugs and check them to see if it's causing some low rpm hesitation, I changed the plugs out October of 2016, car has maybe 8k on those plugs. I replaced them with autolite ht1's Wich apparently have high speed steel design to...

Installing hot rods on my 05 gt, just got the drivers camshaft in. Doing the half-turn at a time method to get the cam back in. Was a pain doing all the caps slowely with that much pressure. Could only get the first three caps on and tighten them a little at a time till 4 And 5 could go on then...

The job seems pretty easy, I hate messing with anything related to the timing. But I'm pretty mechanically inclined. I want going to go the route of removing the 6 followers. Just inch all the cam caps off evenly to back the pressure off with the timing wedge. If anybody has had bad luck doing...

The cars been very well kept and oil changed regularly. I'm mainly worried about snapping a follower in half

I got a manual 05 gt with longtubes, off road xpipe, charge motion delete plates, udp's, aluminum driveshaft, 4.10 gears, Intake and tune. I'm looking at getting the hot rod cams. My question is should I get a Ford performance follower and lash adjuster kit. I've heard that people have followers...

I got a 2005 gt with intake, charge plate deletes, longtubes, off-road xpipe, 4.10's and a tune. Was looking at picking up a set of underdrive pulleys and wondering if it would really be worth it with the other mods I have done, thanks in advance

I'll get a sound clip after work

Well the guy at the shop didn't like the idea of the cutouts hanging so low if they were furthur back. So he welded another hpipe crossover ahead of the cutouts and it fixed the problem, car sounds awesome now. Should hold me over till I get a place furthur out and do l/t's and off-road xpipe