Search results for query: *

I have a McLeod RXT flywheel, McLeod 6 bolt steel flywheel, ford throw out bearing, and flywheel bolts for sale, brand new in box. These parts are for a TR3650, 5 speed transmission and were intended for my 2005 Mustang GT. Parts are located in Augusta, GA. Ordered as a kit from Lethal...

For Sale is a 05-14, 8.8" rear end. 3.73:1 final drive, 31 spline Nitro 1541h axles, Nitro worm gear limited slip differential, Nitro diff. girdle, solid pinion spacer (no crush sleeve), and ARP main cap studs. I bought it in March with plans to install it in my 2005. I got an offer on my...

I’m rebuilding a 8.8 and I’m currently checking tooth pattern. I’ve checked back lash and I have it set to .011” with maximum allowed at .012”. Tooth pattern is centered between crown and root but is too much on the toe on the drive side and heel on the coast side. Everything I’ve read says I...

Just got my car back on the road and the oil pressure gauge on the cluster is pegged out at max. I couldn't find anything on search, possible bad sensor or bad connector? What could cause this?

My car has been apart for some time and now I'm starting to put it back together. I was an idiot and disassembled it while angry and didn't label the plugs. I attached a photo, can anyone help me? It's on the driver's side, on the same loom as the cam position sensor. Thanks in advance.

So, after sitting up for a year my tires aren't looking the best and I'm in the market for new ones. My wheels are 18x9 up front and 18x10 on the rear. I current run Continental Extreme Contact DW's in 255/45/18 front and 275/40/18 on the rear. I live in southern Arizona now and it's fairly dry...

So, February 2015, I drove my car home from school I was at and heard a noise coming from the Supercharger, so I parked it. Long story short, I finally got around to getting the S/C looked at, and it is being rebuilt right now. Car has sat since then with almost a full tank for the past year...

So, I recently sent my Saleen Series VI out for a rebuild. While out for service I inquired about swapping to a better tensioner. I was told by the rebuilder not to swap to a aftermarket tensioner because it could provide too much tension and cause the bearings to prematurely wear out. Has...

I'm looking for the factory snorkel, the piece that connects the throttle body to the MAF. I would like it with the MAF as well if possible. Let me know what your looking for and we will see if we can make a deal. -James

I am looking for a picture of a Windveil Blue Mustang with the new Gen5 Raxion taillights. If anyone has some, I'd appreciate if you could post them. I want to see what they look like, especially if you do not have a blackout panel on the rear. Thanks for any help -James

All Items Sold! Thanks again to everyone!

I looked on the forum, and in most cases people got a P0171 and a P0174 together. I have just a 0171; Bank 1 too lean, any thoughts on why just one side of the car would go lean? My wideband showed way lean, around 17:1, so I shut it down. Any thoughts on why just one side would be lean...

I currently have a '05 GT with a saleen twin-screw on it. Pushing 9.5 lbs of boost and a GT500 fuel pump, some cams, etc. Currently when cruising on the highway at 70 mph, I average 20-22 mpg. That is with the stock 3650, and 3.55 rear gears. I'm looking to install a T56 Magnum, and was...

I'm having erratic fuel pressure showing on my gauge, so I'm trying to trouble shoot the issue. I have the GT500 fuel pump setup on my 05, and I'm showing 28.75 psi after letting the system prime, but not turning the car on. I'm pretty sure it's the gauge, it is only showing around 18 in the...

I like to run my car at both road courses and at drag strips. I'm wanting to get a set of 15" rims so I can run DR's at the Drag strip. I know that I have to use a sway bar relocation bracket, but when you do that your not bolting your sway bar to as much metal. I was concerned that if I do...

I am a soldier, I have been stationed in Germany for the past 3 years, and I really got hooked on road racing, and the only thing that I can find in that area that will allow me to do anything like that is NASA and SCCA. However, I do not know anything about either of these organizations and...

I have a saleen S/C on my 2005, and I am wanting to put a strutbar on my car, since I am on alot of road courses. I know saleen makes a strut bar for the S/C but I also have the BBR motor mounts that lower the engine. Any input on what strut braces would fit? I think the agent 47 would fit...

I'm trying to do a datalog for my car, strategy code FBJR3G5. I know that I have seen Lito recommended a list of: Analog 1 (analog input for wideband) battery voltagepr coolant temptchir fp duty cyclennir FPUMP ACT VOLTS FPUMP FLOW RATE FPUMP VOLTS TAB inj press droposr intake air...

Ok, so I read the saleen maintenance manual, and it said to put a pint of oil in it. Now mine seemed to be higher than I thought it should be, but I thought it was because my car was unlevel. However, now I have a oil leak at the snout. There looks like there is a hole directly...

So I spent a long time coming up with how I wanted my car to sound, and when I built my exhaust, it sounded perfect. However, now I have added a supercharger, and just like a trumpet or any other horn instrument, the extra air has added more volume. I really don't want to go back to the...

I did a search but I couldn't find any info. I have the AEM wideband, and I'm seeing 18:1 afr at idle. Now my fuel pressure is good, between 25-30 psi. Car sounds like it is running good, but my gauge is peaked out at 18:1. Anyone familiar with the AEM's and what could be the problem...

Your knock sensors were disconnected? I was working on my super charger install today, and noticed that the last time I was working on my car, I must have accidentally left my knock sensors disconnected. However, I never got a code for it. What happens when you disconnect the knock sensors...

I could have sworn that I saw on here before that Saleen recommeded 5w-30 for 3v's with their Series VI on it. However, I cannot find it anymore. Does anyone know what oil Saleen recommends for supercharged engines? It isn't in the install manual that I have. Thanks, -James

Anyone know the difference between the saleen alternator pulley that comes with the 475hp kit and the factory one? I bought a S/C used and it is missing the alternator pulley. Any suggestions? -James

I'm looking to buy a Ingalls Torque Dampener set up. Any Vendor carry them, I would prefer to support a vendor here on the forums. PM me a price if you got them or can get them. Thanks -James