324 big bore long block, novi 2200sl,injectors,gauges

[ScootDawg]

i bought this motor from abdulla a year a go and never finished the build already have a stock motor so i will not trade for a stock motor asking $5500 obo+paypal rather not ship also have a spec 3 clutch to throw in also if wanted



built by Mike of Modular performance prior to him passing away.

The Long block was assembled using all new chains, guides, springs, retainers, lash adjusters, seals, etc. I have receipts for the motor as well.

Specs on the motor:
324 Cubic Inch FRPP Boss 5.0 modular (5.4L)
Kellogg 3.75 stroke crank
Diamond custom 17cc stroker pistons 9.4:1*
Upgraded Piston H13 pins at .927 dia
Total seal SS ring set
Oliver billet "I" beam stroker rods @ .927”
HP 153 coated main bearings
King 7065 coated rod bearings
ARP 156-5401 main studs
Rear seal
Block was decked with hone plates
Ceramic coat piston tops
Dry film coat piston sides
Comp 127350 Stage II Blower cams
Comp Valve springs/Retainers
New 2008 Style heads
exedy light weight 8 bolt flywheel
TSS Billet Geared Oil pump



60lb ford racing injectors 0 miles $300 shipped

 

[degmidget]

Will you sell just the head unit?

 

[ScootDawg]

as of right now no want to give it a couple weeks to see if i can sell the complete kit first

 

[skwerl]

I'm confused by your comment about post -08 heads. Is this using 3v or 4v heads? And does it take a 3v or 4v intake manifold? Will it run with the 05-09 computer or do you need a Coyote computer to run it?

 

[ScootDawg]

its the 3v head and 3v intake manifold and 3v computer

sorry for the vague info

 

[roberts]

How many miles on the Paxton kit?

 

[roberts]

Pmed

 

[VistaVert1983]

So all you need is the 3v harness, intake manifold and you're good to go?

 

[petersonb]

I'll snatch up that gauge in a couple days if it's still here

 

[VistaVert1983]

Stock 3v heads? Any port work?

 

[2NY]

Im interested in the intercooler if you want to part it out. Let me know how much shipped? Also, is the wideband have everything included ready for install?

 

[ScootDawg]

So all you need is the 3v harness, intake manifold and you're good to go?

Thats correct this and i dont think the heads are ported

 

[ScootDawg]

Sell pending on both gauges

 

[degmidget]

U have the intercooler sold on here and I want the head unit lets make a deal!

 

[ScootDawg]

I've had a couple of pms about the complete kit waiting to hear back from those guys first

 

[WARstang]

interested in the head unit also

 

[ScootDawg]

pic of the NOVI tag as requested

 

[AbdullaGT500]

I'm confused by your comment about post -08 heads. Is this using 3v or 4v heads? And does it take a 3v or 4v intake manifold? Will it run with the 05-09 computer or do you need a Coyote computer to run it?

It is a 3V motor. Stock 3V deck height, which means its a direct replacement for a 3V motor. Stock wiring harness, stock intake/exhaust manifolds bolt right up.

So all you need is the 3v harness, intake manifold and you're good to go?

Yes.

Stock 3v heads? Any port work?

They are stock 08+ New style heads. Not ported. They were new take offs from a crate motor.

Guys, this engine is an absolute beast and a direct swap for a 3v motor. I have videos of it running from before I sold it to him if anyone would like to hear it. If anyone has any questions about it feel free to PM me.

 

[skwerl]

ARP head studs or TTY bolts? I see ARP main studs but nothing about the heads. I have built heads I was planning on using on my build.

 

[AbdullaGT500]

ARP head studs or TTY bolts? I see ARP main studs but nothing about the heads. I have built heads I was planning on using on my build.

Has ARP head studs as well. Here's my original for sale thread:
http://www.s197forum.com/forum/showthread.php?t=84908


I really wish I had a car to put this in, I'd buy it back in a heartbeat.