Axle Girdle Panhard Bar

[rocknrod]

Does anyone know if the 8.8 Ford Racing Rear Axle Girdle is too tall for the stock location panhard bar?

 

[Midlife Crises]

If you are referring to this one; yes you will have to relocate the panhard bar.

 

[Midlife Crises]

You can see the BMR relocation bracket on the bottom right corner of the table. Next to the orange hammer.

 

[rocknrod]

Okay thank you. I see now the Ford instructions say "Minor modification may be necessary for clearance." alrighty then.

 

[JEWC_Motorsports]

Depends on what girdle you are using. Ford Racing offers different ones.

 

[rocknrod]

0

Depends on what girdle you are using. Ford Racing offers different ones.

I put the link in my thread to the one I was asking about. In blue.

 

[JEWC_Motorsports]

So you are using the low version, it will clear. Mine does and I run a bmr adj panhandle and no relocation bracket.

 

[rocknrod]

So you are using the low version, it will clear. Mine does and I run a bmr adj panhandle and no relocation bracket.

No kidding? That's good to hear. Planning the rear end being pulled and cleaned up along with the rest of the underside stuff.