Beefcake vs BBR

[86GT351]

I guess when I think of heads I think of JPC who outsource the porting but they sell them as RGR heads. I haven't r
Ever shopped for heads personally I get mine done locally

Exactly. Not uncommon at all.

 

[kdanner]

My prediction: BBR won't show up, won't say anything about it ahead of time, and the weak ass excuse will only be given once it is time for them to already be there. I know eight year olds who race Jr Dragsters that make more passes than BBR.

 

[Wnt2gofst]

Yes they did! I have seen the car in person.

So you seen it at the track making passes? You seen it at there shop on the dyno? Or you seen it at a car show claiming it was going to do something?

 

[86GT351]

So you seen it at the track making passes? You seen it at there shop on the dyno? Or you seen it at a car show claiming it was going to do something?

I have seen the car in the shop being worked on and also at a few car shows.

Don't know the numbers as they have been quiet about them it seems and I am not sure if it has been down the track yet.

 

[Greg Hazlett]

I have seen the car in the shop being worked on and also at a few car shows.

Don't know the numbers as they have been quiet about them it seems and I am not sure if it has been down the track yet.

That last sentence is pretty funny! Isn't that BBR's MO?

 

[86GT351]

That last sentence is pretty funny! Isn't that BBR's MO?

There are plenty of cars that BBR builds that see track duty. I know of another 9 second turbo car they just recently built also.

 

[beefcake]

well, i have racestar sending me the matching 17x7's yesterday for my own car,

the 215/55/17 Xenon Tire is a z rated tire and fits on there good. Same thing I had on the boss 17x7 wheels.

Not sure how much e.t. that will cut me back, can't be more than a tenth i figure.

If i'm going to drive it there like that, that's how i'm going to race it.

Who knows, a little more tire might be nice for stopping at 160+, because that's how fast I plan on going!!!!

 

[Mike K]

Nice! That is a true street car if you make that trip win and drive home. I am curious on their excuse after that happens.

 

[UltraKla$$ic]

I got your back Terry! I'm driving this down for the losers! They'll need it!

 

[beefcake]

Nice! That is a true street car if you make that trip win and drive home. I am curious on their excuse after that happens.

i don't know the specs on the shelby they want to bring, it could be a full blown race setup. probably an auto conversion i'm sure. It better be anyway.

 

[GTGHOST]

Is that a custom intake?

 

[Wnt2gofst]

There are plenty of cars that BBR builds that see track duty. I know of another 9 second turbo car they just recently built also.

The black/orange one? That has built engine/tt that only went 9.8.

from the famous tapatalk

 

[GTGHOST]

The black/orange one? That has built engine/tt that only went 9.8.

from the famous tapatalk

Only a 9.8? Hmm wonder what boost it was at

 

[stkjock]

Is that a custom intake?

if you are talking about Terry's car, its a MMR billet intake, not really "custom" as its a item they produce for sale, however there are very few out there from what I've seen.

 

[GTGHOST]

if you are talking about Terry's car, its a MMR billet intake, not really "custom" as its a item they produce for sale, however there are very few out there from what I've seen.

MMR intake looks kinda goofy

 

[Wnt2gofst]

if you are talking about Terry's car, its a MMR billet intake, not really "custom" as its a item they produce for sale, however there are very few out there from what I've seen.

Thats cuase they cost $1400.

 

[CPRsm]

Dude that's cheeeeap for an intake. Most start at 2500. I might mass produce something like that if it could be done in a day to day and a half. Otherwise it's jist not enough money.

 

[Wnt2gofst]

DETROIT (Reuters) - Ford Motor Co. on Thursday said it awarded new Chief Executive Alan Mulally compensation of $39.1 million for four months of work in 2006, a year when the second-largest U.S. automaker posted a $12.7 billion loss.

Works out to $61,093.75 an hour (a Shelby GT500 or Saleen PJ Edition at asking prices), assuming 20 working days per month...

Its hard for people to spend 1400 when there is no data to back it up. No comparison test vs the boss or CJ intake. Both can be had for 1/3 and 2/3 of the mmr.

from the famous tapatalk

 

[GTGHOST]

Dude that's cheeeeap for an intake. Most start at 2500. I might mass produce something like that if it could be done in a day to day and a half. Otherwise it's jist not enough money.

JPC one will be out for $799...are the MMR / sheet metal intakes suppose to be that much better than JPC's? i have a hard time believing they can be

 

[beefcake]

most custom sheet metal intakes are around $2500 as cpr said,

for $1400, it's a great deal on the intake