Boost Brothers Turbo Install.

[Randy_S_14]

Still gives me the "Unhandled Exception" error and deletes anything I put in there

 

[Randy_S_14]

Livelink Version 5.1 Build 0


Is this the newest version? This is what Lito sent me.

 

[one eyed willy]

Livelink Version 5.1 Build 0


Is this the newest version? This is what Lito sent me.

same thing im using


restart your PC?

 

[Randy_S_14]

I just restarted. It lets me change the values now but it still doesn't log anything on analog 1... doesn't show anything...

 

[Randy_S_14]

On the firewire cable, I only use 2 wires correct? Use 2 cut the other 4 off. or am I supposed to use the pin 3 & 4 plus the power and ground wires?

 

[one eyed willy]

1= not used
2= not used
3= analong output
4= ground to car
5= analog output
6= ground to car

 

[Randy_S_14]

Ok, so should analog 1 be connected to the same analog wire that goes to the gauge?

 

[one eyed willy]

Ok, so should analog 1 be connected to the same analog wire that goes to the gauge?

you should have a 0-5 volt analog OUTPUT from the gauge, this needs to go to the firewire(3), and then ground the ground from the firewire(4) to the chassis of the car.

 

[lito]

1= not used
2= not used
3= analong output
4= ground to car
5= analog output
6= ground to car

No ground to car, the device has its signal ground that may or may not be the same.

 

[lito]

Come to Texas Lito

After lostsoul moves there we can plan something. ;-)

 

[lostsoul]

After lostsoul moves there we can plan something. ;-)

I'm close.. I talked to my dad about going to NC with him a week ago. My wife and I would have to give allot up though =-/ How can I ever leave Stanly.. haha

 

[Randy_S_14]

I give up... This thing is pissing me off. Feel like driving this bitch into a tree


Edit: Is there a certain time I need to connect the firewire to the livewire tuner?

 

[JoshK]

what kind of wideband do you have? I can do some research on wiring to that specific one if you tell me

Also, try logging on analog 2. I have two gauges wired onto my firewire cable and relized after the first time trying to log and getting numbers that were nowhere near where they should be that I had them wired to the opposite wires I thought I did.

In my case

Thought WB was on analog 1 and boost gauge was on analog 2, after trying it found out they were the other way around. Maybe you hooked up to analog 2 wires instead of analog 1

 

[Randy_S_14]

PLX Devices wideband

 

[JoshK]

where do you have the wires spliced in for the firewire cable right now? So there are two wire coming off of the red control box that go to the gauge. You need to use your volt meter to find out which one is the 0-5v signal with and which is the ground. Connect firewire wire #3 to the 0-5v wire and wire #4 to the ground wire.

 

[Randy_S_14]

yes, here is one wire going from the 4-pin anolog connector on the red box and one cable with 3 wires going from the TX plug on the red box

 

[JoshK]

What color wire is coming from the tx plug to the gauge?

 

[Randy_S_14]

What color wire is coming from the tx plug to the gauge?

red, black and white

 

[JoshK]

and which one of those three goes to the gauge? Also, where is your firewire cable + connected to now

BTW, do you have the instructions for this wb?

 

[Randy_S_14]

this is exactly how it is wired right now