First time my 2006 GT went to the track.

06TORCHEDGT

Member
Joined
Apr 24, 2011
Posts
436
Reaction score
0
Location
South Carolina
Well its the first time ive been to the track with my 2006 GT. Ran the 1/8 mile, went 8.5 with a 1.9 60ft and 83.5 mph on chrome 18inch AM bullitts with nitto 275/40/18 555s with 32 psi and auto with stock 3.31s. I didnt have time to adjust psi as the track was about to close, I just wanted to make a pass with the stock gears. Im putting 4.10s in this week!
 

Swarzkopf

Senior Member
Joined
Dec 18, 2010
Posts
1,887
Reaction score
0
? Approx quarter?

13.0-13.1

Multiply the 1/8 mile ET by 1.54 for a normally pretty decent guestimate of what the 1/4 mile ET would be.
 

95five-0

Member
Joined
Sep 23, 2010
Posts
235
Reaction score
1
Location
Virginia
Nice time Not bad at all i ran an 8.6 at 84mph on my 06 auto with 3.31s the first time i ever took it down the track. Same mods as in my sig. Hoping for a better outting march 30 when my track opens up.
 

06TORCHEDGT

Member
Joined
Apr 24, 2011
Posts
436
Reaction score
0
Location
South Carolina
Im anxious to see what the 4.10s are going to do, I also adjusted the shift pressures on the transmission and it shifts alot faster and more firm, so that might help out too.
 

Davenow

Member
Joined
Jul 2, 2011
Posts
202
Reaction score
0
Location
Austin TX
How did you launch it? I have an 06 auto and am looking at the same wheels/tires but with 285s
 

psfracer

billy badass
Joined
Apr 6, 2007
Posts
10,917
Reaction score
82
Location
Valencia, CA
http://www.eldemoniorojo.com/calculator.htm

^^^ this is the most accurate conversion I have seen so far. Right one the nose when I compare my 1/8th to 1/4 mile ETs on my timeslips.

My 9.417 I turned a 6.01 in the 1/8th. On my 10.13 with the old set up I turned a 6.47 in the 1/8th.
 
Last edited:

conexion914

Member
Joined
Aug 25, 2011
Posts
303
Reaction score
0
Nice times! I have an auto with 4.10 gears and can tell you that you're gonna need something stickier than a street tire with the gear change to get a good 60'.
 

06TORCHEDGT

Member
Joined
Apr 24, 2011
Posts
436
Reaction score
0
Location
South Carolina
Nice times! I have an auto with 4.10 gears and can tell you that you're gonna need something stickier than a street tire with the gear change to get a good 60'.

Im wanting to get a set of racestars with micky thompson drag radials. Probably the 15x8s on the rear
 

Ssiptang

Senior Member
Joined
Aug 7, 2010
Posts
1,104
Reaction score
2
Location
Downers Grove, IL
You should run 8.0~8.1 with 4.10 + DR with your mods.
I ran 8.1 with full exhaust, CAI, Bama tune, 4.10 and 555R. Nothing else. No suspension upgrade.
Good luck!
 

Latest posts

Support us!

Support Us - Become A Supporting Member Today!

Click Here For Details

Back
Top