Fuel line seeping

Wolf302

Junior Member
Joined
Mar 17, 2017
Posts
28
Reaction score
2
Has anyone had issues with the fuel line connector to the fuel rail seeping? Any success repairing it?
I cleaned mine to get a better idea of where exactly it’s coming from but it seems to be seeping from the connector itself and as far as I know the entire line is a discontinued part. Thought I might be able to swap o-rings but they’re pretty recessed in the fitting.

IMG_4784.jpeg
 

M-Stv54

Junior Member
Joined
Feb 15, 2021
Posts
3
Reaction score
0
Location
Phoenix,AZ
I need the same line and ford discontinued the part . did you ever figure out how to stop the leaking ?
 

Dino Dino Bambino

I have a red car
Super Moderator
Joined
Aug 11, 2014
Posts
4,532
Reaction score
2,642
Location
Cyprus
It sounds like you'll need to improvise a solution. I suggest you cut away the section with the plastic connector, fill the gap with a short section of metal pipe (as a female connection) on the left where there's rubber pipe, and add a short section of rubber pipe (rated for fuel systems) to bridge the metal pipes (as a male connection), securing them all together with hose clamps (double clamp each joint for extra safety).
 

86GT351

Senior Member
Super Moderator
Joined
Nov 14, 2010
Posts
7,316
Reaction score
1,805
Location
Sunny South Florida
Has anyone had issues with the fuel line connector to the fuel rail seeping? Any success repairing it?
I cleaned mine to get a better idea of where exactly it’s coming from but it seems to be seeping from the connector itself and as far as I know the entire line is a discontinued part. Thought I might be able to swap o-rings but they’re pretty recessed in the fitting.

View attachment 95276
Not sure where you are located. See if there is a Hydraulic hose repair facility near you. They might be able to replace the leaking end for you.
 

pass1over

I like it LOW
Joined
Oct 9, 2011
Posts
1,735
Reaction score
379
Location
Trenton, FL
had this happen to me. I leaned a little bit on that fitting, didn't realize it was there and broke the line. You can buy a new quick fitting for the fuel line at an auto parts store. Just cut the old one off and insert the new one.
 

GriffX

Senior Member
Joined
Sep 28, 2017
Posts
1,553
Reaction score
1,065
Location
Rural Germany
Or, if it is only an O-ring, buy a new connector and transfer the o-rings. This connector can be disassembled. (At least this types I have in mind)
 

Kev555

Member
Joined
Dec 12, 2021
Posts
432
Reaction score
208
Location
Ireland
There's plenty of aftermarket options out there for fuel line retrofits, you may get lucky with a female connector like in this kit I posted as an example or do as Dino stated.
 
Back
Top