Going For 800 Rwhp

[05stroker]

is it done yet?, is it done yet?, is it done yet?, is it done yet?, is it done yet? LOL...

^^^ getting anxious as well... when you get it done you should defiitely do a thread with all of the pics of the mods together and show that bad boy off a bit....
carlos

Not to much longer guys , Im trying!

I will most likley post a thread in the pics section after all is done and polished up.

 

[05stroker]

Finally hit the key for the first time in two years, with no fuel and no spark. Motor turns over fine . Before the weekend is out I will load the start up tune and start it up and see if all the fab. and wiring work has payed off, or if I have weeks of trouble shooting to do. I received the DS from Inland Truck Parts today after giving them the measurements yesterday of 47" center to center. It is a 1350 setup from front to back. I used a Strange chromoly trans yoke for the Lentech Strip Dominator with the C-4/AOD tail shaft I have with a 28 spline shaft along with a earlier setup on the rear (as posted previously) so there is no adapter necessary. It is a 3.5" steel shaft with the Strange chromoly trans yoke and Spicer solid u-joints. I did not finish the interior or body parts yet since I feel I will need to get to some of those areas.

All I can say at this point is, WISH ME LUCK!!!!

 

[Irishman]

congrats on getting her to turn over. Will be waiting for the first fire up.

 

[Hawgman]

Good progress Billy!!! Ping me before you get too serious on that tune. Might have some interesting info for ya.

Took mine for a shake down run last night. Between it being totally different than the last time it went down the track, it being too long since I have gone down the track, and the tires being heat cycled so many times that they don't really gum up anymore, lets just say it was like driving on ice for the first 100ft or so of every run I made.

 

[stkjock]

Good luck Bill

 

[05stroker]

Good progress Billy!!! Ping me before you get too serious on that tune. Might have some interesting info for you.

I will call to you tomorrow evening.

Good luck Bill

15 hrs in the garage today, no lunch and just finished dinner !!! LOL

Im serious now !!!

 

[05stroker]

This thing in my garage is acually starting to look like a car again! A few pics of the progress.

 

[UltraKla$$ic]

OMG!!!! Absolutely gorgeous!! From what I can see of the motor it is sweeeet!!!

MOAR pics!!!!!!!!

 

[ethic1]

am I crazy I see no pics....?

 

[05stroker]

I posted them from my photo album on here. Try these.

 

[05stroker]

OMG!!!! Absolutely gorgeous!! From what I can see of the motor it is sweeeet!!!

MOAR pics!!!!!!!!

Just for you.

 

[5.SLOW]

very sweet man i got that jpc intake but in black and now debating if i should got one like yours.

 

[one eyed willy]

looks great!

you can run your hood latch cable behind the fender if you want!

 

[ethic1]

Better! Mayne I love you car!

 

[rford426]

Looks amazing!

 

[dysan]

Can't wait for some vids of this thing running and some track numbers!

Home stretch!!!

 

[UltraKla$$ic]

Just for you.

I don't usually quote pics but this is worthing looking at TWICE!!! LOL!!

Dibs on the Procharger setup when you're done with it! lol

COTM x 100000000000000000!!!!!!!!!!!!!!!!!!!

EDIT: I'd love to come see this car in person. I drive through the piney woods of East Tx all the time!

 

[Doug M]

Wow!!! Congrats on that Beast...

 

[05stroker]

I don't usually quote pics but this is worthing looking at TWICE!!! LOL!!

Dibs on the Procharger setup when you're done with it! lol

COTM x 100000000000000000!!!!!!!!!!!!!!!!!!!

EDIT: I'd love to come see this car in person. I drive through the piney woods of East Tx all the time!

Thanks,

Any time you are this way just PM me and I will give you my cell so you can drop by.

 

[stretch]

love that intake!!