Got A 3v With A M90? Want More Power For Free?!?

[corey5988]

Good deal. I can grab other pics too if you need. My pulley is stock. Is it measured from the major or minor diameter of the pulley groove? I can throw some calipers on it and measure.

 

[Department Of Boost]

Good deal. I can grab other pics too if you need. My pulley is stock. Is it measured from the major or minor diameter of the pulley groove? I can throw some calipers on it and measure.

Yeah, more pictures wouldn't hurt,

You have a stock S/C pulley right? Yep, measure that up will you? You want to measure from the tops if the grooves.

We need to know

 

[corey5988]

Yeah, more pictures wouldn't hurt,

You have a stock S/C pulley right? Yep, measure that up will you? You want to measure from the tops if the grooves.

We need to know

I was at work all day yesterday, but I'll try to get that as soon as I get home today.

 

[Department Of Boost]

I was at work all day yesterday, but I'll try to get that as soon as I get home today.

You da man! Thanks!

 

[corey5988]

Damn. I called around and finally got setup with a frame rack and forgot to measure it before hauling it up. I'll grab my calipers and stop by the frame shop tomorrow.

 

[corey5988]

Sorry for the delay. I couldnt get the belt off so I had to measure it with the belt and then measure the belt at the lands to figure the difference. I got 3" even with the belt wrapped around. The belt measured 0.11", which would be doubled getting a pulley diameter of appx. 2.78". That should be very very close. I should have the car back at my shop by weekend if you want me to double check it with the belt off.

 

[corey5988]

I did a bit of research found the exact pulley size is 73mm (2.874"). Also I should be picking the car back up tomorrow, so let me know if you need any additional info or measurements.

 

[corey5988]

Any news on this?

 

[Department Of Boost]

Any news on this?

Sorry, been out of touch for a few days.

Thanks for all the pics and measurements guys. From the looks of this it won’t be a big deal at all. The bypass valve section may get a bit tricky, we’ll see how that lines up. I don’t think this will be a big deal as long as we can fit everything under the hood (which I doubt will be an issue).

 

[corey5988]

Hell I'll put a cowl hood on it if I have to. Thanks for the update. So looking forward to this. I'd love to have one on the car by the time I finish my GT500 front conversion. *hint hint* Haha, just bustin your balls man.

 

[Captainstr8edge]

Anything new with this?

 

[Department Of Boost]

Still trying to get the "test car" in the shop. It looks like late next week.

 

[fivelinkcobra]

Sorry its taking so long. Our schedules are just not lining up at all. I'm self-employed and work 24/7 on call. But we make this happen.

Jim

 

[evostang]

meh i have my car ready anytime to go .. just let me know gmitch

 

[Department Of Boost]

Sorry its taking so long. Our schedules are just not lining up at all. I'm self-employed and work 24/7 on call. But we make this happen.

Jim

How is that day you are in Waterford look next week?

 

[fivelinkcobra]

Thurs would be alot better for me, any time after 2. Jim

 

[AnotherS197GT]

I don't have a problem coming and getting your car and driving it out to gmitch

 

[Department Of Boost]

Thurs would be alot better for me, any time after 2. Jim

Is that when you are getting into Waterford or when you can get a ride? It would be better to get it earlier if possible. We are going to have to let it cool down a while before we pull the blower off.

If there is anything I can do to help let me know.

 

[fivelinkcobra]

Give me a call on sun and lets try to meet in person at the show in Dearborn. I will be there from 10-4 ish. We can try and set up a plan then.

Jim

 

[fivelinkcobra]

I did try to call and text you a few days ago,your mail box was not set up.

Jim