Installing a paxton novi 2200.

[beefcake]

Looking good!

 

[07TGGT]

Man, that polished kit looks amazing! Can't wait to get mine on.

 

[beefcake]

Man, that polished kit looks amazing! Can't wait to get mine on.

yes they do

 

[Kimura]

I have to admit, those polished Paxtons do look good under there.

 

[DSargent09]

Returning to stock for a few weeks. Need a stock belt diagram. I have been searching, any help is much appreciated.

 

[Kenaizer]

Returning to stock for a few weeks. Need a stock belt diagram. I have been searching, any help is much appreciated.

It's on page 291 in the owner's manual.

Sorry for the crappy cell phone pic.

View attachment 45417

 

[DSargent09]

Thank you! Fortunately I figured it out and got it up and running... Some one will one day need it and find it in this jungle of a thread now lol.

 

[Kenaizer]

Dynoed it last weekend.

I was happy to still be over 600 rwhp after having to lower the boost by putting the stock pulley and air box back on due to fueling issues.

Hopefully I'll be able to do an E85 conversion soon and bump the boost up from 10.5 back to 12.5. It's just hard getting the better half on board with spending money on the car when this year has been an expensive one and next year looks to be the same.

 

[D98GT]

Wow..I really want to get my car on the dyno to see what it does since you are putting those numbers down on the 3.8? I don't get how you are making so much damn boost haha

 

[Kimura]

Dynoed it last weekend.

I was happy to still be over 600 rwhp after having to lower the boost by putting the stock pulley and air box back on due to fueling issues.

Hopefully I'll be able to do an E85 conversion soon and bump the boost up from 10.5 back to 12.5. It's just hard getting the better half on board with spending money on the car when this year has been an expensive one and next year looks to be the same.


http://s1350.photobucket.com/user/Kenaizer1/media/dyno_zps0a5da0ba.jpg.html


Yeah, it's big and on it's side. Shoot me.

How does it feel? Happy with it?

 

[Kenaizer]

Wow..I really want to get my car on the dyno to see what it does since you are putting those numbers down on the 3.8? I don't get how you are making so much damn boost haha

Haha I bet yours is quite a bit more spunky than mine with your new setup.

Yeah the boost has us all scratching our heads.

How does it feel? Happy with it?

Yeah I'm very happy with it now. Still very well behaved when I want it to be.

That being said, I still want more eventually. Lol

 

[oktw88]

Installed a slim fan setup to clear up some room. Just a few more parts to get this thing running and back on the streets.

 

[DSargent09]

Did that slim fan help a lot? Before you go any further make sure you tightened the water pump pulley bolts. Also I can not tell if its on there or not but make sure you put the vac hose on the BOV before you pile all that junk in the way.

 

[oktw88]

Did that slim fan help a lot? Before you go any further make sure you tightened the water pump pulley bolts. Also I can not tell if its on there or not but make sure you put the vac hose on the BOV before you pile all that junk in the way.

Thanks. Still have some stuff to finish up before I get it running again. Hopefully I will get it all buttoned up after thanksgiving.

 

[Deleted member 162826]

Looking to do a beefcake build during the winter because of this thread lol. How long will my M6 last? The car has went a best of 12.2 @ 118 with my current bolt ons and bald 245 all season tires lol. The car is a 2011 with 18,300 miles.

Beefcake any xmass or holiday specials?

 

[Kenaizer]

Looking to do a beefcake build during the winter because of this thread lol. How long will my M6 last? The car has went a best of 12.2 @ 118 with my current bolt ons and bald 245 all season tires lol. The car is a 2011 with 18,300 miles.

Beefcake any xmass or holiday specials?

No telling on the transmission. Could last as long as you want, or it could go in a month after install.

PM beefcake or JPC, both usually have great deals.

 

[Deleted member 162826]

^ thanks for the heads up! I don't beat one the car regularly and it's not a daily driver so hopefully it would be good. I'll be adding new wheels/tires, lower control arms, the dual post shifter bracket, and the modified transmission bushing insert this winter to my current mod list. Only thing I'm not sure about is the blower set. It seems like a decent price and this thread has me convinced I can install it over a weekend. Although I do like the idea of that slim fan and the above picture. I'm just lost on how you hook it up with the stock wiring and such. I've been flowing for awhile just not a heavy poster until I decide to boost it or not. Lol

 

[Kenaizer]

The only wiring you do is for the BAP in the beefcake kit. It's running a power wire, splicing 3 wires, and a ground. Nothing too extensive.

 

[Deleted member 162826]

Oh yeah I saw the posts on that in this thread. I mean wiring for a slim fan. I guess that's the hardest part of the install is dealing with the room? I'm not sure if I could figure it out haha


How do you like the extra power?

 

[Kenaizer]

Oh yeah I saw the posts on that in this thread. I mean wiring for a slim fan. I guess that's the hardest part of the install is dealing with the room? I'm not sure if I could figure it out haha

Oh I see. The lack of room was difficult to deal with at times, but not extremely stressful. It (the fan) does come highly recommended by the ones who have done it, though.

How do you like the extra power?

It sucks. I hate it.