Installing a paxton novi 2200.

[Trousersnake]

Does the big red race valve bolt on? And does it need retuned if its not recirculating anymore? Or is it unmetered air ?

 

[gizmo5]

Does the big red race valve bolt on? And does it need retuned if its not recirculating anymore? Or is it unmetered air ?

You're heading in the wrong direction. Its a blow through system, as in the air blows through the MAF right before the TB. The relief valve vents to the atmosphere, it is not measure as it is before the MAF.

As for what bolts on, anything with a Greddy type flange

 

[Trousersnake]

A lot of guys are running the tial 50mm on svtperformance

 

[Trousersnake]

I never knew they were vented to the atmosphere.. I figured they would plumb it back in..

My good buddy has the red race valve on his cogged f2m Mach 1 and it sounds like a fighter jet.. May be a bit much if you do a lot of driving

 

[beefcake]

this is my dual bov setup, one on each side

notice the ground in front of the tire

http://www.youtube.com/watch?v=A_uyDf2wwV8&list=UUB_kxREKyR6zAxQ25l7pMSw&index=3

 

[stretch]

just done this today

 

[onebadgsx]

nice, i ilke it. where did you mount it at. elbow at intercooler??

 

[stretch]

yep^^

 

[Trousersnake]

Stretch Are you LarryB on corral?

 

[2FST-4U]

Stretch Are you LarryB on corral?

Yes thats him. ;-)

 

[gizmo5]

I just finished messing with my valve and I can't get it to stop fluttering no matter what I do. Even with it adjusted all the way out. I might make a switch to the Big Red like stretch.

 

[Kimura]

I just finished messing with my valve and I can't get it to stop fluttering no matter what I do. Even with it adjusted all the way out. I might make a switch to the Big Red like stretch.

Are you talking about the fluttering sound on the decels that sounds like a turbo car? Why would you want to stop that?

I think it sounds cool! I can't wait!

 

[gizmo5]

Are you talking about the fluttering sound on the decels that sounds like a turbo car? Why would you want to stop that?

I think it sounds cool! I can't wait!

BECAUSE ITS NOT GOOD FOR MY 2200 THAT DOES NOT HAVE A WARRANTY ANYMORE...

lol

 

[Wnt2gofst]

BECAUSE ITS NOT GOOD FOR MY 2200 THAT DOES NOT HAVE A WARRANTY ANYMORE...

lol

?????

 

[stretch]

Are you talking about the fluttering sound on the decels that sounds like a turbo car? Why would you want to stop that?

I think it sounds cool! I can't wait!

because its too small

 

[gizmo5]

?????

Pulley change, bye bye warranty. If anyone has anything smaller than the stock 3.8" pulley, they don't have a warranty on their blower. It's in the warranty paperwork, and on the stock pulley cap. "Warranty Void If Removed" cap on pulley bolt.

 

[stretch]

Stretch Are you LarryB on corral?

yep thats me

 

[gizmo5]

because its too small

I'm leaning towards the TiAL 50mm valve or the big red valve. Big price diff though...

Can you post more pics of your setup? I'd like to see how much room is left, how it all got welded up/angle, and how you closed the stock location.

 

[Wnt2gofst]

Pulley change, bye bye warranty. If anyone has anything smaller than the stock 3.8" pulley, they don't have a warranty on their blower. It's in the warranty paperwork, and on the stock pulley cap. "Warranty Void If Removed" cap on pulley bolt.

I never had that cap as others said they didn't either, and some of got a 3.6 pulley stock on our blowers.


But ya stock one will be going bye bye. About same time I put my 3.4 pulley on.

 

[busarich]

I put the greddy to tial adapter and the tial q on mine for about 270$ shipped. Fits were the paxton bypass was.

http://www.youtube.com/watch?v=Uu6KDImTHpI