Installing a paxton novi 2200.

[jukens]

This is where Im at with this... The original way didnt work, but Im gonna give it a go again to make sure, then if that doesnt work, Im gonna do the relay way that jukens did, and if that doesnt work, its going back to the way I had it or I might just take it out to the woodline and shoot it.

Jukens did it this way I believe

That is the way I wired mine.

 

[gizmo5]

Test 1:
- Stang8psi version

From BAP
Red - to car side of purple green wire
Orange - to pump side of purple green wire
Black - ground
Thin brown/black wire - nothing, taped off

And guess what.... It just fired up. I dont fucking get it, maybe Im retarded, whatever. BUT I swear on all ancient aliens thats how I had it the first time and I checked it like 20 times to be sure and even called vortech and went on a buddy texting spree to figure it out.

Fuck it, it works now, buttoning it all up and never looking at it again or it might get mad at me and blow up.

 

[beefcake]

LMAO

Test 1:
- Stang8psi version

From BAP
Red - to car side of purple green wire
Orange - to pump side of purple green wire
Black - ground
Thin brown/black wire - nothing, taped off

And guess what.... It just fired up. I dont fucking get it, maybe Im retarded, whatever. BUT I swear on all ancient aliens thats how I had it the first time and I checked it like 20 times to be sure and even called vortech and went on a buddy texting spree to figure it out.

Fuck it, it works now, buttoning it all up and never looking at it again or it might get mad at me and blow up.

 

[Kenaizer]

Haha it's best to just be happy it's working and never think about it again..

 

[gizmo5]

Haha it's best to just be happy it's working and never think about it again..

Yup, as far as Im concerned Im never going under the trunk mat again. The BAP is dead to me... as long as it keeps working... lol

 

[stang8psi]

See I Guided you my lil grasshopper lol. Glad it's all working now!

 

[Kenaizer]

See I Guided you my lil grasshopper lol. Glad it's all working now!

You intimidated him into fixing it with all that yelling yesterday. Lol

 

[gizmo5]

LMAO, I couldn't sleep right because of the damn BAP, lol. I knew how to wire it, and figure it was stupid easy, but murphy jumped into my koolaid and stomped around. lol

Whatever though, now I know for a fact its right and can sleep.

 

[konablue11gt]

Did you put a 30 amp fuse in # 13 ? .....if not your gonna get pissed again approx 6k rpm and bam car will die and you will be far from home with no testers and no idea what the fuck happened .....when this does happen you will remember this thread and go oh shit yeah.....

 

[gizmo5]

First thing I did before I touched wires, disconnect battery, change out fuse.
I actually wanna get a 40 in there, but all I had in my garage was a 30

 

[stang8psi]

30 will be fine in there!

 

[gizmo5]

30 will be fine in there!

There you go yelling again... LMAO

 

[stang8psi]

Damnit, I keep thinking I am talking to some of the kids at work lol. There is no need for people ( not you) to try and change what is not needed. The 30 amp is what is required and needed not a 40, and the wiring was and is the propper way. That is all now lol

 

[beefcake]

Damnit, I keep thinking I am talking to some of the kids at work lol. There is no need for people ( not you) to try and change what is not needed. The 30 amp is what is required and needed not a 40, and the wiring was and is the propper way. That is all now lol

lol

so, what your saying is, follow the instrucstions........

 

[gizmo5]

Shut your beefhole beef! I follow my own directions! LOL

 

[beefcake]

Shut your beefhole beef! I follow my own directions! LOL

who's the one yelling now??

 

[wazslow]

Shut your beefhole beef! I follow my own directions! LOL

Note to self. Follow the directions on my install this weekend. LOL

 

[stang8psi]

lol

so, what your saying is, follow the instrucstions........

Exactly

 

[gizmo5]

LMAO! You guys are great. Now, Beefy, sit tight while I call my wind and mil your distance... Incoming.

BOOM! HEADSHOT!

 

[wazslow]

Got my kit installed over the weekend. Paxton 2200 kit with Boost Referenced fuel pump booster, and ID1000's. Ken is still working on the tune/datalogging. Sure isnt alot of room to work in there once you start putting on the intercooler piping. LOL