Installing a paxton novi 2200.

[Trousersnake]

Bullet so its not even needed ?

My boss intake came with one and was not sure if it was needed

 

[Wnt2gofst]

Bullet so its not even needed ?

My boss intake came with one and was not sure if it was needed

Took some pics hopefully they help


Just Another 700whp DD 5.0

 

[JPO8GT]

Happy Novi 2200 owner good blower :thumbup:

 

[Trousersnake]

Is the piping supposed to be bolted in before the fan goes in?

 

[Trousersnake]

I've been fighting this for an hour

 

[Kenaizer]

Yeah I think so. Did you relocate the electrical connection on the fan?

 

[Trousersnake]

Anyone have to trim the fan shroud where the wires go across

 

[Trousersnake]

Yes relocated it but the wires are right in the way now

 

[Wnt2gofst]

I had all mine bolted together and put in from bottom.

Just Another 700whp DD 5.0

 

[gizmo5]

1. Your flange should be towards the SC bracket, not towards the front of the car/fan. AND PUT THE BOV ON NOW! Or you will throw a wrench. I promise

2. Connect it to the coupling BEFORE you put the fan back it

3. Yeah, that fan shroud... I made it my bitch after it pissed me off one too many times... lol

 

[onebadgsx]

1. Your flange should be towards the SC bracket, not towards the front of the car/fan. AND PUT THE BOV ON NOW! Or you will throw a wrench. I promise

2. Connect it to the coupling BEFORE you put the fan back it

3. Yeah, that fan shroud... I made it my bitch after it pissed me off one too many times... lol

1. make sure blower outlet is pointing straight down.

2. install pipe with blow off valve and vacuum attached now.

3. then install fan.

read back 15 or so pages gizmo shows how you may have to cut up your shroud. my first car i did but second i didnt

 

[Bullett]

I'm definitely not at expert but no both aren't used.

 

[slvr08gt]

Tial Q BOV, 2 PSI spring, Greddy flange adapter, T bolt clamps, and Canton tank have been ordered.

Now only if the Paxton kit wasn't on a boat in the Pacific right now, FML LOL.

-Nick

 

[gizmo5]

Tial Q BOV, 2 PSI spring, Greddy flange adapter, T bolt clamps, and Canton tank have been ordered.

Now only if the Paxton kit wasn't on a boat in the Pacific right now, FML LOL.

-Nick

BOOYA! You're gonna love that TiAL Q...

 

[slvr08gt]

That video of it on your car was the SOLE reason I purchased it! Roger Doger

 

[mikeyfitz]

big red race valve >

 

[Trousersnake]

So last night I read the Instructions ... Do that ... Don't wing it looking at the pictures and watching the horsepower tv episode.. Everything I had problems with was in text..

Hope to finish it up after work tonight around 8pm when I get out of work

 

[cyclerick]

1. make sure blower outlet is pointing straight down.

2. install pipe with blow off valve and vacuum attached now.

3. then install fan.

read back 15 or so pages gizmo shows how you may have to cut up your shroud. my first car i did but second i didnt

Instructions aren't clear. Are you saying to install the BOV, SC plate and SC before putting the fan shroud back in???

 

[onebadgsx]

install mounting plate, install blower with outlet pointing straight down, then install first pipe with bov attached and the vacuum line attached to bov. bovwill touch mounting plate. then install fan shroud. its tight but it will go

 

[gizmo5]

install mounting plate, install blower with outlet pointing straight down, then install first pipe with bov attached and the vacuum line attached to bov. bovwill touch mounting plate. then install fan shroud. its tight but it will go

This us 100% correct

Sent from your moms room...