Installing a paxton novi 2200.

[onebadgsx]

Lol, I'm not that grumpy... yet...

Everyone else reading this thread, I know there's a bunch of bullshit back and forth chit chat, but for fucks sake, just skim over it and gather all the little gems throughout the pages. We have all made contributions to this epic 2200 all knowing thread, so appreciate it.

Its an online garage of multiple 2200 coyote cars filled with dudes, beer, wrenches, and experience. You're welcome. If you for some reason don't appreciate it and come in barking STFU orders... Well. It won't get you very far...

Good night.

Sent from your moms room...

nicely stated...

 

[Kenaizer]

Uh... pretty sure there's some boobies tucked away somewhere in this thread too.






You forgot to mention the boobies, gizmo.

 

[D98GT]

Sorry for the blurry picture; can someone tell me the specs on that intercooler pipe that I have crushed so I can order another one?

Either that or maybe just post up a list of the ones that come with the kit and i'll order an entire damn set and paint them while im down

 

[gizmo5]

Holy shit what did you hit?

As for the pipe, just measure it and order a generic elbow from summit/jegs. I'm sure its the cheapest route.

Sent from your moms room...

 

[D98GT]

The question is more like what didn't I hit haha

is what the car currently looks like. I need to find some guys with the paxton that have the Roush front bumper as that is what I am going with as a replacement; curious how my intercooler is going to tuck in there.

I won't have access to the car for a few days to measure that specific pipe. I was just going to order from siliconeintakes.com I'm hoping the intercooler didn't receive too much damage as I can tell it had some bent fins but I think it'll be okay

 

[gizmo5]

The question is more like what didn't I hit haha

is what the car currently looks like. I need to find some guys with the paxton that have the Roush front bumper as that is what I am going with as a replacement; curious how my intercooler is going to tuck in there.

I won't have access to the car for a few days to measure that specific pipe. I was just going to order from siliconeintakes.com I'm hoping the intercooler didn't receive too much damage as I can tell it had some bent fins but I think it'll be okay

Damn dude lol. Go start a "I fucked my ride up" thread. I wanna know the whole story

Sent from your moms room...

 

[Mystickeith50]

Holy shit....weight reduction ftmfw!!!! In all seriousness that sucks man.

 

[D98GT]

I'll go 9s with that much weight out of the car for sure since I went 10.10 on the last outing haha

Trunks are overated.

Anyone able to maybe look later or figure out the pipe dimensions so I can purchase the parts to get them here soon; definitely want this car back out in 2 weeks or so and that'll be holding me back

 

[onebadgsx]

Look on paxton manual. You can download from line. All part numbers are on there or pm beef im sure hecan order. Ill be out for the weekend or id measure for you.

 

[konablue11gt]

http://www.paxtonauto.com/article.php?id=154

links to all of paxtons manuals and parts lists

 

[D98GT]

Looking at the above link I see in the instructions where they mention the pipe:
Locate the Ø3" aluminum tube with the multiple bends. Work the "S" bend portion up into the engine compartment and insert the other end (the end with the 90° bend) into the silicone coupler in the previous step. Secure with a #48 worm gear clamp.

However when looking at the parts list I can't see which part number that this one would be:
4fq212-030 disch asy, 2011 mstg5.0 1
[FONT=Arial,Arial][FONT=Arial,Arial]2A017-876-02 SPACER, .875 OD X 1.565 LONG 4
4[/FONT][/FONT]fq[FONT=Arial,Arial][FONT=Arial,Arial]012-040 [/FONT][/FONT]dischtube[FONT=Arial,Arial][FONT=Arial,Arial]B, 2011 MSTG GT 1
4[/FONT][/FONT]fq[FONT=Arial,Arial][FONT=Arial,Arial]012-050 [/FONT][/FONT]dischtube[FONT=Arial,Arial][FONT=Arial,Arial]C, 2011 MSTG GT 1
4FQ017-011 SPACER, TB, 1.25, 2011 MSTG GT 1
4FQ112-030 DISCH TUBE A, 2011 MSTG GT, BYPS 1
4GE012-030 DISCH TUBE A, 6.2 CAMARO SAT 2
4PGM012-010 ELBOW, REDUCER, 4X3.5, CAST 1
7C040-008 M4-.7X8MM SCHD SS 2
7C060-080 M6 X 1.00 X 80 SHCS CL 12.9 4
7C080-066 M8 X 1.25 X 65 HXHD CL10.9 4
7F008-021 NUT, M8 X 1.25, SERRATED FLG 4
7J006-093 6MM WASHER, PLATED 4
7J312-875 5/16" WASHER, CUSTOM 8
7P062-187 1/16 NPT X 3/16 HOSE BARB 1
7P375-250 3/8"X3/8"X1/4"MALE BARB TEE 1
7P500-001 1/2" HOSE UNION 4
7P500-016 TEE, .5 X .5 X 1/16 NPT, METAL 1
7PS300-275 REDUCER, BLK Ø3.0-Ø2.75 1
7PS300-300 SLEEVE, BLACK, 3.00D X 3.00 3
7PS300-301 BUMP HOSE, 3.00D X 3.00L 1
7PS350-200 SLEEVE, BLACK 3.50"IDX2.0"LG 1
7PS350-304 SLEEVE, BLK, 3.5" X 3.0"[/FONT][/FONT]l [FONT=Arial,Arial][FONT=Arial,Arial]1
7PS400-300 SLEEVE, BLK, 4.0" X 3.0"[/FONT][/FONT]l [FONT=Arial,Arial][FONT=Arial,Arial]1
7PS400-301 REDUCER, HUMP, PROG 3.0 X 4.0 1
7R002-044 #44 SAE TYPE F SS HOSE CLAMP 1
7R002-048 #48 SAE TYPE F SS HOSE CLAMP 9
7R002-052 #52 SAE TYPE F SS HOSE CLAMP 4
7R002-056 #56 SAE TYPE F SS HOSE CLAMP 5
7R002-064 #64 SAE TYPE F SS HOSE CLAMP 3
7R004-687 STPLS CLAMP, 13/16", 1 EAR 8
7S300-003 RUBBER ELBOW 3" MODIFIED 2
7S350-120 ELBOW, Ø3.5", 120º, 2.5" C.L. 1
7S350-220 ASM, FLOW STRAIGHTENER, 3.5 OD 1
7U012-238 O-RING, 2-238, 3.484ID X .139 1
7U030-187 VACUUM HOSE, 3/16 48 IN
7U030-036 1/2" OIL DRAIN HOSE 3 FT
8A003-071 MAF, 3.8ID, 05 MSTG GT 1
8H040-175 FILTER, 1.75"ID, RACE BYPS 1
[/FONT][/FONT]8D204-010 RACE BYPASS VALVE-BLACK/SAT 1
8PN101-050 WELDED CAC CORE ASY 1

 

[D98GT]

and I just got raped...Just for technical assistance for the guys checking this thread; NEVER DAMAGE THAT S PIPE. Costs $140 to replace and it's a painful amount to pay for such a simple part but at this point I don't have much of a choice as I can't retrieve the part off to bring to someone to fab up for me.

gotta pay to play I guess =(

 

[konablue11gt]

holy shit 140 for a 3"by 3.5" curved pipe??

 

[D98GT]

No shit...I even told the guy that its some bs haha

He said they had never sold just that piece alone so it figures I had to damage the most expensive one ha

 

[JEWC_Motorsports]

Van so you don't want the one I found for 45 dollars????














Jk but I'd have looked my ass off for a cheaper alternative.

 

[D98GT]

I was about to be pissed that you didn't text me lol

I wish I had the time to do so; body parts are already arriving so my car will possibly be done by next weekend so to get it out of the shop I need to have all of my parts ready

 

[JEWC_Motorsports]

Text coming.....

 

[UltraKla$$ic]

_

The question is more like what didn't I hit haha

is what the car currently looks like. I need to find some guys with the paxton that have the Roush front bumper as that is what I am going with as a replacement; curious how my intercooler is going to tuck in there.

I won't have access to the car for a few days to measure that specific pipe. I was just going to order from siliconeintakes.com I'm hoping the intercooler didn't receive too much damage as I can tell it had some bent fins but I think it'll be okay

Your car has the same amount of metal on it as a Hershey's kiss and weighs just as little and you're worried about an intercooler pipe?!?!?!?!?!?!?!?!?!?!?


WHAT THE ?!$##!!!! OMG................I am TOTALLY at a loss, you kill me Van!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[D98GT]

Haha im confident in my body guy to get me back to where it needs to be. I'm trying to make the best out of this horrible situation and attempting to keep my head up

 

[UltraKla$$ic]

Haha im confident in my body guy to get me back to where it needs to be. I'm trying to make the best out of this horrible situation and attempting to keep my head up

You know I'm messin with ya! I don't know what happened, but I'm glad you're still alive to tell us about it!

If you need anything, LMK in advance and I can come over and help with whatever.

I must be retarded. I went to a PDR guy for an invisible body wave I thought I saw because I couldn't sleep at night..........sheeeeeeeeeeeeeeeeeesh, I can imagine what you must be thinkin..

It's gonna be OK.