MindIfISmoke's? Built Part 3.

[toorbeenee]

I know what you mean! I did some pulls with the with and without the meth earlier at 17 psi and with only 13 deg of timing, well, my hands are still shaking! LOL

it feels like a rush

 

[keoni1984]

Car looks awesome Matt!

Mikey, did you get a ticket??

 

[mikeyfitz]

Oh yeah

 

[MindIfISmoke?]

Pretty sure this clutch or trans is fucked! Clutch is defiantly not disengaging all the way

 

[ZmanM3]

Stop breaking stuff!

 

[MindIfISmoke?]

I feels like I'm wrestling a bear putting it in gear... 1-5 they are all the same. No grind just hard as hell to put in gear.

 

[JeremyH]

What clutch? Figure out the wot box wiring yet?

 

[MindIfISmoke?]

Wot box is fixed! Slave is leaking! Pulling trans now

 

[killswitch_c]

Hey dude I think your clutch is smoked I had a focus before my mustang and the same thing happen when my clutch went out and I drove it around to long like that till I broke my linkage on the top of my trans then I fixed it all and then
my syncro in 2 went out

Sent from my ADR6350 using Tapatalk 2

 

[MindIfISmoke?]

It was the slave

 

[MindIfISmoke?]

 

[ctt326]

Can you work on that thing with your eyes closed yet?

 

[rford426]

Edit



Good luck man

 

[ZmanM3]

Hey, it isn't suppose to look like that. I'm thinking someone may have reached the limits of the stock transmission. Were you running the stock clutch?

 

[UltraKla$$ic]

Just TAPE everything together!!!!!! It'll make it twice as easy when you have to take it back off for the bazillionth time!!!!

You'd tear up an anvil son! LOL!!!!

 

[ctt326]

You'd tear up an anvil son! LOL!!!!

lmao

 

[BruceH]

That's what my slave looked like after 1600 miles with a centerforce df.

 

[ZmanM3]

Just TAPE everything together!!!!!! It'll make it twice as easy when you have to take it back off for the bazillionth time!!!!

You'd tear up an anvil son! LOL!!!!

Well considering what Matt's going through I can understand why you don't drive yours.

 

[MindIfISmoke?]

That's what my slave looked like after 1600 miles with a centerforce df.

What did you replace it with Bruce?

 

[BruceH]

What did you replace it with Bruce?

McLeod RST. Then a 6060 and another RST. IIRC the last one came from JPC, it's worth it to call them if you go with one.

Edit: How do the splines look on the input shaft? Any twist?