N/a 3v 1/8th mile E.T.'s

[09gt3v]

All the local car clubs have rented a track out for us next month and its 1/8th mile track which I've never paid much attention to the e.t.s everyone turns in the 1/8 just curious how fast you guys with n/a cars are getting your car to go in the 1/8!

 

[NotQuik]

Slow...8.0's

 

[smoken1986]

My old bolt on 3v run 7.8's @90 on motor and 7.6's @94 on a 75 shot with a average DA of 850-950

 

[skwerl]

The official 1/4 mile ranking stats also show 1/8 mile times. Look over this chart and it will give you an idea of what guys are running in the 1/8 and what that equates to in the 1/4.
http://www.s197forum.com/forum/showthread.php?t=99580

 

[Weou09]

Same as Smoken here. 7.90s N/A. DA is a good bit higher here though.

 

[Deez-67]

I think I ran an 8.0 N/A

 

[GERMANSHEPERD]

7.14@97 in the 1/8 NA

 

[Weou09]

7.14@97 in the 1/8 NA

You ran 7.14 in a 3700lb N/A 3 valve? I'm guessing it was a bigger cubic inch with heads and every bolt on under the sun. That is really close to what I run with a lighter car with 430hp and I don't cut slow 60'.

 

[psfracer]

The official 1/4 mile ranking stats also show 1/8 mile times. Look over this chart and it will give you an idea of what guys are running in the 1/8 and what that equates to in the 1/4.
http://www.s197forum.com/forum/showthread.php?t=99580

^^^What he said.

 

[09gt3v]

7.14@97 in the 1/8 NA

What's ur secret? Lol

 

[Weou09]

What's ur secret? Lol

323 cubic inch, Foxlake heads, 127600 cams, 4.56 gears. He didn't cut as good of a 60' time as I did on my 7.01 run but his car trapped faster than mine so I bet he is very close to 450rwhp.

 

[GERMANSHEPERD]

Pretty much what Weou09 stated is the 'secret'-really isn't one. Car hooks decent, not amazing best 60' is 1.57, then it just runs like its been shot out of a cannon from the 330' mark. Car hasn't been on a dyno in 3 years but I would guess it is around 450ish on a DJ. Im thinking one day i'll do a converter change.

 

[lee12609]

what about a basic bolt on 05-09?

i need to get mine to the track, i've been told they run 8.80-9.0s with basic bolt ons, but i have no clue.

 

[Ssiptang]

what about a basic bolt on 05-09?

i need to get mine to the track, i've been told they run 8.80-9.0s with basic bolt ons, but i have no clue.

I ran 8.1 with full exhaust, CAI, tune and nitto 555R on my auto 3v

 

[cschoening09]

i run 8.8-9.0's with my basic mods and street tires. 3.55 gears

 

[lee12609]

I ran 8.1 with full exhaust, CAI, tune and nitto 555R on my auto 3v

i run 8.8-9.0's with my basic mods and street tires. 3.55 gears

thats a big difference...

 

[Bolton500]

7.9 @ 89 1.8 60ft cams/gears/boltons.

 

[11secLX]

8.3s with 4.10s and 28" drag radial.

 

[conexion914]

8.1x-2x in the summer and low 8.0s to 7.90s in the winter.



Sent from my SGH-I747 using Tapatalk 2

 

[blue streak]

When I bought my 07 GT, I drove straight to the track from the lot. 5 speed, 3.31 gear, premium car. Went 8.93@81. Intake, X-pipe, 4.10, radials, went 8.0s. Heads, 127600 cams, went 7.60s. It could have ran faster with the heads/cams, but I was running borrowed 28" tires that killed my 60', opposed to 26" tires.