New Best today at Atco

[TungstenGT06]

Well I finally had time to get to the track today and got a new best time.Here is a breakdown of the run.
60'-1.729
1/8-7.523
1/8mph-92.33
1/4-11.753
1/4mph-117.23
It was very cold there today. My first run I tried to take off loading the converter and I spun bad had a 2.1 60' and ran a 12.6. On my best time I left at about 1000rpm's that seemed to work best for me. I will post the time slips when my wife shows me how to scan them.

 

[GT4Dino]

Nicely done, but I do believe a cage is eminent!!!

 

[TungstenGT06]

Yeah, That's something I have to think about. I hope to put in a converter,1pc driveshaft and some suspension work over the winter.

 

[Mick Mach]

vey nice to not have a D/S and no sup work! Maple Grove?

 

[TungstenGT06]

vey nice to not have a D/S and no sup work! Maple Grove?

Mick, I was at Atco today. I don't know what the DA was. But it was about 38 degree's out. I also ran a 11.82,11.77,and a 11.93. They were damn near back to back. I could have ran probably twenty or more times today.

 

[KILLER06GT]

What tires are you running and at what psi?

 

[Mick Mach]

Mick, I was at Atco today. I don't know what the DA was. But it was about 38 degree's out. I also ran a 11.82,11.77,and a 11.93. They were damn near back to back. I could have ran probably twenty or more times today.

Im blind...I see now you had Atco in the subject line.

Killer...I run the M&H 325's at 14/16psi with a 1.68 60ft.

 

[TungstenGT06]

What tires are you running and at what psi?

Killer, I'm running Mickey Thompson Drag radials 275/40/17@16psi. The first run I had them at 18psi and I spun bad.

 

[Ken3030]

Nice run! What other work do you have done? I love the tungsten color.

 

[xtweakerx]

hey guys, im currently running the 275/50R17 M&H Drag Radials w/ stock 3:55 gears and stock suspension w/ brenspeed sct 2 93 octane tune and c&l racer intake.

Where do u guys recommand I put my tire pressure at?
And any tips on how and where to launch w/ this setup and where may be a good shifting rpm point?

 

[TungstenGT06]

Nice run! What other work do you have done? I love the tungsten color.

Ken, All I have done is the Saleen supercharger@10psi with a JDM tune and 3.73 gears. I found out that the DA that morning was -1800 and it was only about 35 degree's out. Talk about some mineshaft air. Over the winter I plan on doing a converter,driveshaft,and suspension.

 

[Ken3030]

Ken, All I have done is the Saleen supercharger@10psi with a JDM tune and 3.73 gears. I found out that the DA that morning was -1800 and it was only about 35 degree's out. Talk about some mineshaft air. Over the winter I plan on doing a converter,driveshaft,and suspension.

Are you running race fuel or 91/93?

 

[xtweakerx]

anyone to my question?

 

[PenguinGT]

Nice!

PM me when you plan to go to Atco again. I'm 20 minutes down the road from there and usually only head to the track when I know a few other Mustangs will be there.

 

[TungstenGT06]

Ken, I run a 93 octane street tune. Penguin, I probably won't go back until the spring unless our weather changes. I will pm when I go, the other day I was surrounded by GTO'S.

 

[PenguinGT]

Ken, I run a 93 octane street tune. Penguin, I probably won't go back until the spring unless our weather changes. I will pm when I go, the other day I was surrounded by GTO'S.

Yeah, the GTO guys have a whole regular thing goin on there lately...

I was thinking of waiting for Spring as well. It's just too damned cold lately.

 

[PNR Welding]

Yea, I always see a few there. But we always have our S197 bunch there also. Me, Jim (flounderlips), and Mike (K&M auto). We are usually faster.

 

[PenguinGT]

^ Looks like I need to get out to the track more often!

Do you guys mostly head there on Tuesdays, Thursdays, or Fridays?

 

[TungstenGT06]

I think Paul goes to the track everyday they are open!!!!

 

[TungstenGT06]

Here is a copy of my timeslip. I'm car 6548 in the left lane.