Sct edelbrock tune help

[TheSlow1]

Wondering of anyone has or is willing to share their sct edelbrock tune with me or maybe a base values file for the edelbrock. I'm working on redoing the tune in my car being it appearing the original base values file was that of the Kenny bell.

Let me know what you have and are willing to share so I can possibly get me car going and running the way it is supposed to run.

 

[doogie]

I would gladly share mine, but it was done with a Diablo tuner.

 

[psycho bob]

your tuner should be able to give you a basic tune just to limp the car to the dyno for a real tune.

i do have an sct tune for the eforce, but it won't do you any good if your ecu has a different code. the one i have also is for 60lb injectors, 127500 comp cams, phase limiters, bap. if you have gt500 fuel pumps i don't think you could use it. also i never really used this tune. i got it from bama chips tuning and ended up going with a diablosport tuner instead. i was able to start the car with it and it drove around the block and down the road, but i was not getting into the gas pedal AT ALL

 

[TheSlow1]

Actually I have stage 2 cams. 60s and a bap as well. And I just have my cams locked out. I have my own tune that does work alright but there are tipin issues, fuel milage reads double what I make. And there are certain areas that I know should be adjusted that were never touched. I'm not worried about the computer code, being I wouldn't be using the tune, i just would be copying certain areas and pasting into a new base tune.

 

[psycho bob]

if you want it you can have it just pm me your email

 

[stkjock]

if the strategy codes for the PCM are not the same they tune will not work

also most tuners lock the tune so it cannot be read by others

 

[*JZ*]

If you're in need of a tune for your setup, let us know. We've done more than enough of the Edelbrock systems. We have the tune dialed in. As a matter of fact, we are doing an Edelbrock install for Edelbrock this weekend in a trade show down in Ft. lauderdale this weekend.

 

[TheSlow1]

Your right that the tune won't work if strategys are different but you can look and compare files to get an Idea of where you need to be or what all needs to be adjusted. Things like spark tables, MAF tables, manifold volume for bigger manifolds and things like that can all be taken and applied to a new tune to create the proper file

 

[stkjock]

/\ only if you can read the file. I know there are systems that can, however most tuners lock theirs, so it's not so simple to open them to be read

 

[TheSlow1]

Ah ok I see what your saying. Sorry I guess I'm mainly asking for files from people with pro race packages as those files are not locked

 

[stkjock]

^ ok, then that makes sense.