1/4MILEMUSTANG
Member
I have a complete all forged Eagle 5.0 stroker kit. IT was ran in my car for a couple hundred miles and the tuner torched a piston in it, so he replaced all the parts to freshen up the motor and I took it apart and ended up building a all billet big bore motor instead. So this kit Has all new bearings,NIB Arias .020 over dished piston/ring package,federal mogul main bearings and clevite rod bearings. The rods were cryo treated last year when it was torn down with a 24hr dwell treatment and the entire assembly has already been rebalanced for new pistons. I had to have the rod journal cut undersize on the crank out of the box because the none of the rod journals were the same size and would have had all different bearing clearances.
$1500 firm + shipping.
Fully race prepped and machined 06 block for above rotating assembly. Block has ARP main studs and bigger upgraded ARP side skirt bolts, has been align honed,bored/honed with plates and decks have been trued.
$550 + shipping
MMR stage 2 custom turbo cams with 200 miles on them. I dont have the exact specs but I have already given MMR the grind #'s off the back of the cams and am waiting for the specs.
$500 shipped
McLoed twin disc clutch and billet SFI 8 bolt flywheel with same mileage as all other parts. Clutch has 10 spline discs and has a stock clutch feel to it. Rated to 1000hp-SOLD
TR3650 tranny with 6k miles on it out of an 06 GT Eleanor
$650 + shipping
GT500 pump assembly and lethal performance dual FPDM wiring setup(200 miles also)
SOLD
Siemen deka 60lb injectors with same mileage as everything else- SOLD
I am located in Conway Arkansas and am willing to drive a few hundred miles to meet up with someone to drop off the bigger items that will be expensive to ship. I own a mustang performance shop and build race engines for a living. I would be willing to assemble the shortblock for free if someone bought the block and rotating assembly. I can accept paypal as long as the money is gifted or I also accept all major credit cards except american express. If you have any questions feel free to call me Mike @ 501-697-5194 pics available upon request
$1500 firm + shipping.
Fully race prepped and machined 06 block for above rotating assembly. Block has ARP main studs and bigger upgraded ARP side skirt bolts, has been align honed,bored/honed with plates and decks have been trued.
$550 + shipping
MMR stage 2 custom turbo cams with 200 miles on them. I dont have the exact specs but I have already given MMR the grind #'s off the back of the cams and am waiting for the specs.
$500 shipped
McLoed twin disc clutch and billet SFI 8 bolt flywheel with same mileage as all other parts. Clutch has 10 spline discs and has a stock clutch feel to it. Rated to 1000hp-SOLD
TR3650 tranny with 6k miles on it out of an 06 GT Eleanor
$650 + shipping
GT500 pump assembly and lethal performance dual FPDM wiring setup(200 miles also)
SOLD
Siemen deka 60lb injectors with same mileage as everything else- SOLD
I am located in Conway Arkansas and am willing to drive a few hundred miles to meet up with someone to drop off the bigger items that will be expensive to ship. I own a mustang performance shop and build race engines for a living. I would be willing to assemble the shortblock for free if someone bought the block and rotating assembly. I can accept paypal as long as the money is gifted or I also accept all major credit cards except american express. If you have any questions feel free to call me Mike @ 501-697-5194 pics available upon request
Last edited:
!
