Turbo guys...HELP!

[ulev1st]

Recently I read an article on a turbo install of the Turbonetics kit for the S197 ..I believe it was in Muscle Mustangs and Fast Ford mag...anyway they pictured a screen looking mesh that was used to "straighten out" the airflow so that the MAF read better. Does anybody know where I can get some of this stuff? I can't get any info from Turbonetics....
Thanks in advance for the help.

 

[Freaknazty]

i remember the article but it was sent to them by turbonetics i have no idea where else you could get that stuff though it looked like some fine thread chicken wire lol maybe try one of their vendors ....

 

[jason0156]

My freind Josh Had the same kit installed by HP in Jacksonville. The air straitening screens, Straiten the Air frow before the maf. It caused alot of problems on his car. He is on this forum maybe he can give you somemore info.

 

[Kevin@PMP]

Do you have your MAF pre-turbo? If so just move it to right in front of the TB.

 

[blacknlte]

Article
http://www.musclemustangfastfords.c...ford_mustang_turbonetics_turbo_kit/index.html

article:


Pics

 

[GI Joe]

Recently I read an article on a turbo install of the Turbonetics kit for the S197 ..I believe it was in Muscle Mustangs and Fast Ford mag...anyway they pictured a screen looking mesh that was used to "straighten out" the airflow so that the MAF read better. Does anybody know where I can get some of this stuff? I can't get any info from Turbonetics....
Thanks in advance for the help.

Why dont you check with Jim and get the extra pipe he made when CALI and I designed the new piece. Its working on my car...

 

[ulev1st]

I spoke with him...he wants me to get it tuned and then send him the picture of how the MAF ended up in position before he makes the pipe... he didn't seem so co operative on this matter to me..

 

[silverpoison]

you have to play with the maf to clock it on a position that doesnt give you problems with the signal. mine is facing up, the pigtail for the MAF is abuot one inch away from the hood....i have a steeda cowl hood.

 

[ulev1st]

Cool thanks...the MAF is right in front of the intake inlet..I have the SCT 5000 meter...it is supposed to be more tolerant...not looking like it so much. I'll keep trying.

 

[silverpoison]

Cool thanks...the MAF is right in front of the intake inlet..I have the SCT 5000 meter...it is supposed to be more tolerant...not looking like it so much. I'll keep trying.

is your MAF housing welded to theintake pipe?

i have a MAF hosing that Jim sent me and is attached to thepiping with silicone hose, try to put the maf on top of the intake pipe, that worked for me. I am using a stock MAF with a MAFIA set on number 3.

 

[ulev1st]

Mine is like yours...silicon connectors...I'll give that a try..thanks