which spark plug for your sc?

[donnyonee]

for those with the sc's, which spark plug and why?
just curious and im using the ht0s@10# .
with adam's tune .
481/445 with stock internals.

 

[94tbird]

i use the HT0 as well. why are you selling your car btw?

 

[donnyonee]

im retireing soon and id like to go another direction, maybe a rv of some type.

 

[Infinitro]

Dayum! Donny that is a sweet ride. Good Luck Bro!
HTO's @ 10#'s Here.

 

[94tbird]

the mustang is a PERFECT retirement car hehe

 

[MikeVistaBlue06]

HT0's recommended by HPP (and Saleen). Gapped 0.035"

Mike

 

[Hawgman]

Probably going to get the same answer from everyone.. but HT0s also.

 

[cheftjpeck]

FRRP "0" Plugs gapped at .035 (basically autolite HTO with FRRP logo)

 

[GJP05]

How much did you pay for the logo?

 

[cheftjpeck]

How much did you pay for the logo?

I just bought a rubber stamp and stamped it myself..that and used a sharpie to complete the FRRP look...that was funny though....LOL...(not really)

 

[silverpoison]

HTO's, just make sure you gap them properly. They can give you a lot of troubles if they are not gap correctly. Get the PMP gap TOOl!!! it works like a champ.

 

[donnyonee]

ive already got the tool and waiting for plugs to arrive.

 

[Mick Mach]

while we are on this can someone list the gap for different psi? Im running 6psi with the HTO's still set at the factory gap.......

 

[donnyonee]

i heard that out of the box their about .045
i never checked my first set.
i have the tool and will close them to .035 before going in

 

[Cali HP Addict]

If you run over 10lbs boost they should be gapped at .030.

 

[Slofoot]

I ran my first set for quite awhile at the factory gap at 9.5 psi with no problems. I did gap them down to .032 and am running them at .032 with 11.5 psi now.

 

[Mick Mach]

thanks guys!