Yes
I know Jeremy installed Zimmers hot side wonder if he had these issues
Oh One more
Power steering is hitting, not sure if we will redo or see how it holds up for a few miles?
Ill take a picture of the one bracket I have tomorrow. It is a 2 piece bracket for the intercooler and I only have one. The second bracket, to the best of my knowledge, looks like a stretched out Z. I ended up making my own brackets so if you want the one I have Ill throw it in the mail for you free of charge.
Hang on hell Ill go get it out of the garage because its the only bracket I have left and I am assuming it is the one that goes into the hood latch.
Oh lol They are basically a 45 degree bend 1" with I think 3-4" straight then another 45 degree bend 1" they go into the bumper. Ill take some pictures tomorrow. There is the only bracket I have left. I assume it goes onto the hood latch bolt and the other is a stretched out Z shaped bracket.
Oh One more
Power steering is hitting, not sure if we will redo or see how it holds up for a few miles?
Ill take a picture of the one bracket I have tomorrow. It is a 2 piece bracket for the intercooler and I only have one. The second bracket, to the best of my knowledge, looks like a stretched out Z. I ended up making my own brackets so if you want the one I have Ill throw it in the mail for you free of charge.
Hey Mak I had the same problem with my powerhouse kit, I ended up just dimpling the pipe so it would clear the ps hard line.
its hard to tell from this picture but you get the idea.
Thanks
But I think we are mocking it up tonight, So we will just make our own.
But thanks for the pics and i figured it mounts to the top of the bumper brace?
Not to hijack, but it looks like you used the DEI lava rock wrap.
How did you like those DEI SS zip ties?
Were you able to get them tight?
We just wraped a set of headers with the same material and it seemed like we just couldn't get those SS zip to get really snug and tight.
Not to hijack, but it looks like you used the DEI lava rock wrap.
How did you like those DEI SS zip ties?
Were you able to get them tight?
We just wraped a set of headers with the same material and it seemed like we just couldn't get those SS zip to get really snug and tight.
Not to hijack, but it looks like you used the DEI lava rock wrap.
How did you like those DEI SS zip ties?
Were you able to get them tight?
We just wraped a set of headers with the same material and it seemed like we just couldn't get those SS zip to get really snug and tight.
Speaking from experience I would suggest using ANYTHING other then those crappy metal zip ties! I just went to the hardware store and bought some metal hose clamps (might be the same as what Konor is talking about) and used those.
Also: if I had to do over I would pick up that lava wrap. I don't know if its a big difference better then normal header wrap but it sure looks like better quality and the look is cleaner also. Just my .02¢
...some metal hose clamps (might be the same as what Konor is talking about) and used those.