Search results for query: *

For Sale: SCT X3 PN3000 $SOLD!!!! UnMarried and Unlocked Comes with the USB cable and disc. JLT Series 3 Cold Air Intake $SOLD!!!! This was only on the car for 1 month. I did have to modify the heat shield to fit since my power steering is located on the radiator shroud. Comes with MAF...

Just wondering if anyone else has had a hard time getting the P1000 code to clear? So far I'm on my 5th "emission tune" with no luck. My mods are JLT CAI, Steeda Charge Motion Deletes, JBA LT's with H-Flow Catted H-Pipe, Roush Mid's and GT500 Stock Axel Backs on a Bama Tune. I have searched...

Looking for a 2010 GT Manual Shifter Assembly. Has to be for a 2010 GT ONLY as they are different for other years. Looking for everything you take off when replacing with a MGW short throw shifter. If you have one laying around send me a pm of what you want shipped to 85396. Pictures and or...

It is time to replaced the clutch. I have 39,000 miles on my 2010 GT. When I had the Procharger I noticed an occasional slip and a shudder when taking off from a stop. Now after I removed the Procharger I had a couple of months with no issues until last week when I now have a lite chatter while...

For Sale: $3400 2010 Mustang Gt 4.6L Procharger HO Intercooled P1SC Kit Kit includes Polished P1SC Head Unit, Polished Bracket, 39.5LB/HR injectors, Blue Powder Coated Piping, Procharger Intake Tube, Intercooler, Pulley, Procharger BPV, Intake and BPV filters, 2 bottles of Procharger Oil...

I have had many manual cars but never keep one long enough to experience a bad clutch. I have noticed some slippage in the high rpms in boost recently, but with it being cold here I don't get on it hard anymore. Regular drivability was just like stock. But now I get a shudder every now and then...

Sorry if it has been covered, I didn't see anything in my search. I'm looking to remove my Procharger for possible sale. I don't have the stock fuel pump anymore and have gotten conflicting information about leaving the Gt500 feul pump in. I will have JLT CAI, JBA LT's and High Flow Cats with...

Got some 20" Black AMR's and want to change out the center caps to a Ford OEM center cap. I had the Bullitt wheels from American Muscle with OEM Bullitt caps from LatemodelRestoration.com but they don't fit the AMR's. I don't want to ghetto rig just any center cap in there. So has anyone...

For Sale: C&L cold air intake for a 2010 GT. You will need a tune for this intake. Filter might need replaced as it had rubbed on something. Comes with everything needed for install but the tune. $150 Shipped to the lower 48 states. DiabloSport Pedator This came with my Procharger kit...

Got my 2010 GT tuned. Made 470whp & 414wtq on 10psi at 6200rpms. It has been close to 110 out here in Arizona. I know there is not much to do with it being that hot. I have seen Redline Water Wetter mentioned, lower temp t-stat and better fans. I'm still looking into those, but thought...

Thinking about getting a Raptor Shift Light after I get the Procharger tuned on my 2010GT. Just wanted to get a few opinions on how high they would rev to to keep everything safe on the stock block. It is the Procharger HO kit. My tuner will be tuning the car pretty safe and I will also...

For Sale: Saleen S281 Front Grill...Fits 2010-2012 GT's $110 Shipped SOLD!!! Has all included hardware. Only on the car for a month. 2010 Factory GT Strut Tower Bar No longer for sale! Took it off as it will not fit with the Procharger. In great condition. Stock GT Intake Cover $60...

I just got the Gt500 pumps installed and wanted to load the Procharger tune to start it up and check everything. But I didn't see a tune for the Procharger on there. It just listed Modified Stock...which states it is not a Supercharger tune and it list Original Backup. I'm use to SCT's and...

I'm tring to wire up the extra fuel pump that comes with the Procharger Kit. I have the wires cut and tried to use the "Heat Shrink/Solder Wire Splice" thing that Procharger supplies but it didn't work at all. The solder didn't melt but the wires did! So now the wires are shorter and I have...

Started on the build around 2 months ago slowly installing part by part. Part list: Procharger HO Stage 2 Kit NGK 1 Step Colder Plugs JBA Long Tube Headers JBA Off-Road H-Pipe JBA Catted H-Pipe JBA o2 Extentions Bullet Prothane Motor Mounts Bear DecelaRotors (Fornt and Rear...Drilled and...

I tried searching and didn't see any place to order these. Anyone know where to get a set? They are the round rubber grommets on the top of the valve cover. Thanks

Anyone know the part numbers on the 2010 GT500 Axel backs? Also is there any difference between these and the ones on a stock GT? All I found in a search was they were the same as the 05-09 GT but with the tip extended. Looking to pick up a set and want to make sure I get the correct ones...

Just buttoned up JBA LT's with Off Road H-Pipe to the Roush Extreme exhaust on my 2010 GT. Start up sounded good after the idle settled down. Rev'd it and I knew I had some issues. Out on a test drive it was very bad. I live close to the freeway with a 75mph limit so I got to get on it. Idle...

Noticed I got a dent in the oil pan. It is in the rear on the bottom. Doesn't look that bad but noticeable. Only concerns I have is where the oil pick up is at and if this will cause any issues. Anyone know if the oil pick up tube is in this deep part of the pan and how much clearance there...

Got my CS Lower Grill with fog lights and Boss splitter in to install when I do the Procharger. I have read that you need to trim them to fit with the IC. Anyone have any pics of the trimming? Just want to get an idea of how much I need to trim to determin what tool I need to do it right...

Should be getting my Procharger HO Stage 2 kit next week for my 2010 GT. Is the MAF in the IC the ideal spot and does it cause tuning issues? I remember reading about a 2010 with one of the first kits having tuning issues and needing to move the MAF right before the throttlebody. But I have...

Anyone running this set up? Just curious on how its going to sound. I did a search but came up empty. Just ordered JBA LT's, JBA O/R H-Pipe, along with a Procharger. Anyone got any sound files?

Ordering a Procharger and will most likely be ordering LT headers or just a Off-Road Pipe for the stock headers along with it. I'm not looking to make anymore power then what the SC will make by itself. Money is not an option, just want to get rid of the cats. Or is it ok to keep the stock...

Going to get the Procharger HO Stage2 kit and had a question about the tune that comes with it. Anyone running this tune? I will be installing either LT Headers or an Off-Road pipe....either way no cats. Also will throw in some 1 step colder plugs. I basically just want to use this tune...

I'm days from ordering a SC for my 2010 GT and the Ford Racing Whipple is one of them on the list. The only thing I do not like about the Whipple is the intake as for 2010 it uses a stock like box. I would rather have a open air filter kit just for looks. I have been doing lots of...