Search results for query: *

I posted a part out last year. Sold a bunch of stuff, but got a lot left. My plan was to make the car a track car after the wreck. I've decided to let that go and get it all out of my way. I will take $2500 for everything. The blower setup is gone along with the gt500 front and Roush...

Wrecked Roush part out KY (JBA, Forgestar, etc) **updated with list prices** This is pulled directly from my for sale ad for the car. Not a single part will be removed until the blower is sold. The car will be for sale as whole until then. As said in that ad I will take $8,000 for the car...

I wrecked my car last week. I got an estimate to fix it and it is not enough to total the car. I'm looking to sell it as is to fund a track only BBF fox body. The car does have a previous salvaged title. It is an authentic Roush R-gt (09-002, only 2 made). It has 53K miles on it. The mod...

I've had the Roush parked at my parent's house (1/4 mile away) because of the cold weather and it's tires (anything below mid-40* get pretty hairy with these tires). Well yesterday I forgot to plug up the block heater in my truck and ran the batteries down pretty quickly trying to start it. I...

I had never though of it until today, but is anyone using their neutral rev limiter for launching (to act similar to a 2-step)? I did a google search, but nothing came up on this forum and most of what came up seemed to be 2v related. Usually I just modulate the throttle manually, but I have...

Looking to buy 2 rear 15" wheels either 8" or 10" wide (preferably 8"). Looking for a Prostar/Racestar style. I already have a brand new set of bias plies, so wheels only please. Also I'm looking for reasonable prices, so most likely a Jegs/summit set. I am open to other styles as long as...

I've had my car to the track several times. I believe I have met my highest potential with the crappy street tires. My best time was a 12.846 @ 107.xx with a 60' of 2.0x. Oddly enough my second best time was a 12.904 with a 1.9x 60. With the exception of the first time I had the car out...

I have two trucks (a 2wd '01 F150 crew cab and a 4wd '99 reg cab short bed). I bought the '01 with a bad headgasket to fix, so that I would have more room for a winter beater. The '99 had a few lugnuts back off and broke the remaining studs screwing up some of the body work. I was going to...

As some of you guys know I'd been running a certain tune (will not list the name) and over time just had numerous small issues and it just didn't feel 100%. The best ET I could get was a 13.9X on the stock pulley M90 with several bolt-ons. I recently upgraded to a 2.57" pulley and had the tune...

I had been having torque bind during 1-2 shift causing me not to be able to carry the car over 4k. I fabbed up (I'm a tinkerer and very much DIY kinda guy) some torque limiters and they helped. Following that I was able to go up to around 6100. I still wanted to stiffen the drivetrain up a...

I'm looking for a set of OEM motor mounts. I don't care the condition of the bushings. I'm wanting to try an experiment. These things are worth next to nothing on the used market. I'll pay shipping and a bit for the trouble of packing/shipping if you've got an old set laying around. Just...

I've had this problem intermittently for the last month or two. I only seems to do it after warm up. The car will basically act as if the throttle is stuck. I can feel the car pulling/holding speed if I take my foot off the throttle with it in gear. When I go to clutch it to change gears the...

I was bored today and decided to pull my blower and block off the silencer ports. Well I got it pulled and lo and behold I see no silencer ports on mine. Am I missing something. My blower port looks exactly like this one in the pic, except it doesn't have the two silencer ports. Mine is a...

I finally got the car out to Beech Bend last night. Was kind of dissappointed in my times, but I must say I'm hooked. Absolutely loved it. My first run I just wanted to get a feel for it. I took it pretty easy and pretty sure I let out a bit early. 1st run R/T - .602 60' - 2.441...

Yeah, I know Afco, Shelby, etc. I'm thinking outside the box a bit maybe. But how would an aluminum Griffin/BeCool/whatever 2 row radiator serve as a heat exchanger? I've found one, that I believe will fit, though I haven't measured. I've found a Griffin that measures 31"x16"x3". I know the...

For some reason my car does not have the "info" system to the left of the flasher button. The "buttons" are basically filler plugs. I've had the trim off before installing vent pods/guages and what not. The wire harness/plug is there and actually snaps into the center filler plug. My...

Like title states, I’m looking for an OEM 07-09 GT500 lower grill. I don’t want any billet or anything aside from the OEM style. I’ve looked for used ones and haven’t found anything and they’re $200+ new. That’s absolutely ridiculous, IMO, and at this point I am not willing to pay that much...

I hadn’t noticed until recently but I’ve got a leak under my car. It appears to be tranny fluid and appears to be coming from the bellhousing area. It only seems to be doing it during or right after spirited driving or going over 3-4k. It’s an ’09 with some performance stuff done, but the...

I’ve got a ’99 5.4L F-150 that I need a custom tune for. I was wondering if you guys did tuning for these? And if so is the lifetime tune program was applicable to this too? I have this for my ’09 and would like to go with you guys on this too. Thanks.

I have for sale an OEM 8-bolt flywheel. *I had this left over from an SN95 project from a few years ago. *I had it resurfaced for my 5.4L F150 that I'm swapping an F250 super duty zf5 tranny into. *I thought all mod motors were the same at the time I had it resurfaced, but when buying my cutch...

I'm in the process of getting my car tuned. I ran a datalog using my Innovate MTX-L guage. The equation must be wrong, or I'm using the wrong analog output on the guage because my analog values on the datalog range from 0-4.99. From what I've seen it should use the same equation as the LC1...

I currently use Central Heat & Air for my home. I've been researching auxilary heating (boilers, forced air, etc.). I'm a huge DIY person and was looking at doing something myself. My idea is similar to that of a Heiss Heater (see link). They pretty much have a fire box encased in refractory...

I need help finding an adapter fitting. Needs to be M12x1.0 inverted flare to -4an, male on both ends. I've looked and came close, but not exactly what I need. I'd prefer stainless, but not a neccesity.

I'm in no way affiliated with these wheels, I just ran across them and figured I'd post them up for you guys that may be interested...

I was going to buy a Mafia and fuel pump off a member here, but the pump ended up selling before I got the funds for both. They were going to be mainly for peace of mind. Now, since the Mafia is only available I'm wondering if I should get it and source an upgraded pump elsewhere? Right now...