Anyone running 29.5x10.5 inch slicks?

[Robertt305]

Anyone running these?

Any former issues?


I just ordered a set and now I'm hearing that there is rubbing issues going down the track...

 

[psfracer]

I am running the 29.5 X 10.5 Ws. You do have to clearance some items---depends on the wheel you are running. The inside corner of the passenger side will be the closest. Do you have adjustable LCAs?

 

[Robertt305]

My LCA are not adjustable.

Is it possible to remove the inner fender or do I have to start hacking away at stuff?

I'm running race star wheels

 

[psfracer]

What is the backspacing of the wheels you are running. How wide are they?

 

[Robertt305]

10 inch. 5.5 BS

I haven't mounted these yet

 

[gil_t2]

Sounds like a bad combo, How modded is your car and what gears are you running.

 

[psfracer]

10 inch. 5.5 BS

I haven't mounted these yet

Ok, I don't know if you have a narrowed rearend, or something else going on, but a 10 inch wheel with only 5.5 backspacing would stick way out on a S197 with a stock length rearend. Most Bogarts that are 10 wide for our cars are between 7.0-7.5 backspacing, as you only have about 3 inches of room from the mounting flange of the axle to the fenderwell.

Have you already been running those wheels?--or are they new as well?

 

[Robertt305]

Ok, I don't know if you have a narrowed rearend, or something else going on, but a 10 inch wheel with only 5.5 backspacing would stick way out on a S197 with a stock length rearend. Most Bogarts that are 10 wide for our cars are between 7.0-7.5 backspacing, as you only have about 3 inches of room from the mounting flange of the axle to the fenderwell.

Have you already been running those wheels?--or are they new as well?

Stock rear an no they don't stick out... Been using them for a year...

And on the other question I have 4.10 gears and 750 rwhP

 

[psfracer]

Ok, if they don't stick out then they don't have 5.5 inches of backspacing, or they are not a 10 inch wheel.

 

[Robertt305]

Well it is a 10 inch maybe I'm confused with backpacking...

It's designed for our cars though with out any fitment issues besides the sway at relocation

 

[Robertt305]

Well talked to a buddy running a Goodyear 29x11 r15 D5 with no rubbing issue at all..

This Tire height will do the trick so I ordered it, now I'm off to return the MT's....

 

[psfracer]

Yes, I ran the Goodyear's before the M/Ts---size was 29X11.0 and I had absolutely no issues also.

 

[Robertt305]

Sweet!!!

How did they hook for you and what tire pressure do they like?

 

[psfracer]

They hooked fine and I usually ran them at 12 psi.

 

[Blackblurr2007]

Stock rear an no they don't stick out... Been using them for a year...

And on the other question I have 4.10 gears and 750 rwhP

I think thats too much tire unless the gear is more than 4.10.. If its an auto maybe, stickshift NO.. My .02