Coyote POWA

WOT

Member
Joined
Jul 23, 2010
Posts
320
Reaction score
0
Location
South Florida
I'm already registered. I'm Number 50!

Street Legal of course and we will be legal to 215 so I'm going to shoot for 214.9


Main goal is over 200. But if nothing goes wrong that shouldn't a problem. But every MPH over that is tough. So I'll just be happy breaking 200. But I won't be satisfied unless it goes 210+.

A dot between the car's numerical would certainly be fitting and somewhat comical IMO. perhaps painters tape? LOL

Sometime back I had a brief and short conversation with very little detail because of timing with a record holder in-regards to one of their top speed runs in a Mustang.
It was mentioned that there's a broken patch of road somewhere 1/2 a mile down the track, nothing major but enough to trigger the car's traction control and cutting a bit of power for top end speed. Not sure how much truth there was to the lost of power in that statement but this might be something interesting to look into considering your goal.

Never the less the car has have proven to be a performer where it counts Vs. some of the glory pulls I've seen pop up lately.
I'm hoping you go out there and break a record in the 5.0 good luck in your endeavor and I'm sure many are watching and excited for some more result and updated.
 

2012Coyote

Fuggit.
Joined
Nov 4, 2011
Posts
587
Reaction score
8
Location
Mansfield, OH
I'm already registered. I'm Number 50!

I guess great minds think alike... :beer:

GodSpeedMagnet.png
 

kdanner

Senior Member
Joined
Jan 14, 2011
Posts
1,123
Reaction score
1
Location
Austin
It was mentioned that there's a broken patch of road somewhere 1/2 a mile down the track, nothing major but enough to trigger the car's traction control and cutting a bit of power for top end speed. Not sure how much truth there was to the lost of power in that statement but this might be something interesting to look into considering your goal.

There is a transition that was pretty rough about 1/4 mile out. They were actually working on it some more during the October event because it was so bad. There's a lot of good things about the new Beeville location, but the surface isn't one of them, Goliad was a lot smoother, it's too bad the Navy wanted it back.
 

D98GT

STREETCAR
Joined
Oct 31, 2009
Posts
3,234
Reaction score
1
Location
Liberty TX
There is a transition that was pretty rough about 1/4 mile out. They were actually working on it some more during the October event because it was so bad. There's a lot of good things about the new Beeville location, but the surface isn't one of them, Goliad was a lot smoother, it's too bad the Navy wanted it back.
Exactly and I remember speaking to you about this at the October meet :popcorneat: If only they would allow people to used that newly paved part
 

darkstar november

magical turning mustang
Joined
Dec 2, 2009
Posts
1,089
Reaction score
4
Location
ft lauderdale fl
There is a transition that was pretty rough about 1/4 mile out. They were actually working on it some more during the October event because it was so bad. There's a lot of good things about the new Beeville location, but the surface isn't one of them, Goliad was a lot smoother, it's too bad the Navy wanted it back.
when i did my final run sunday of the oct event they had fixed the bump mostly, it was at about the 1000ft mark if i remember correctly

you can see a bump at about the 10sec mark

http://www.youtube.com/watch?v=2adMyEkTUNs&list=UUy6-riZCcyqWYURWqK1F0tA&index=6&feature=plcp

 
Last edited by a moderator:

Nastystang06

Senior Member
Joined
Jan 1, 2010
Posts
853
Reaction score
0
Location
Mt. Pleasant, Tx
Hey are your front o2s before or after the turbo, and whats the .ar on the exhaust side.

I think Hellion copied your kit lol
I dont mean exactly but you were the first and then all of a sudden hellion has top mount it twins
 
Last edited:

KenB

Senior Member
Joined
Oct 12, 2007
Posts
1,254
Reaction score
2
Hey are your front o2s before or after the turbo, and whats the .ar on the exhaust side.

I think Hellion copied your kit lol
I dont mean exactly but you were the first and then all of a sudden hellion has top mount it twins

Our O2 are where they are supposed to be, after the turbo. :)

.68 AR

and no comment on the rest except that we do a lot more to prove our kit than to strap it to a dyno. Hope they attempt the same. People don't buy dyno numbers anymore, they want NO BULLSHIT performance. That's what we are selling.

But considering they are shipping their kit and it hasn't been down the track or shown any performance besides dyno numbers, looks like they are going to just sell it and see what happens.
 

Nastystang06

Senior Member
Joined
Jan 1, 2010
Posts
853
Reaction score
0
Location
Mt. Pleasant, Tx
Your definatly doing it right, great job man

And that leads to my next question

I know beefcake had issues with o2 extenders

Did you have to use any?

And did you have to extend anything to relocate the pcm?
 

jodadejss06gt

TEAM DELETE SHIT
Joined
Apr 19, 2010
Posts
3,986
Reaction score
10
Location
Severn MD
Ken def get one of those cams strapped down on the roll bar filming you on the mile. I bet that is going to be a blast. HOpe the brakes are in good shape!
 

KenB

Senior Member
Joined
Oct 12, 2007
Posts
1,254
Reaction score
2
Your definatly doing it right, great job man

And that leads to my next question

I know beefcake had issues with o2 extenders

Did you have to use any?

And did you have to extend anything to relocate the pcm?

Our kit doesn't need extensions. The 02s are very close to the factory location.

And there are no wires to extend to move the PCM. The factory harness has enough slack.

Ken def get one of those cams strapped down on the roll bar filming you on the mile. I bet that is going to be a blast. HOpe the brakes are in good shape!

I did forget to mention that we are putting some brembos on the front also.


I have the helmet cam that I can now put on the bar. And I think I'm going to pick up another Contour Roam. I really prefer the Contour over the GoPros.
 
Last edited by a moderator:
Joined
Mar 17, 2011
Posts
266
Reaction score
0
Location
Detroit, MI
Our kit doesn't need extensions. The 02s are very close to the factory location.

And there are no wires to extend to move the PCM. The factory harness has enough slack.



I did forget to mention that we are putting some brembos on the front also.


I have the helmet cam that I can now put on the bar. And I think I'm going to pick up another Contour Roam. I really prefer the Contour over the GoPros.

What do you like about the contours better? How's the sound quality compared to GoPros?
 

TurboS197

Junior Member
Joined
May 5, 2011
Posts
42
Reaction score
0
Sounds awesome!!! I saw you guys run out at SGMP! Hoping to have my car at the next mile event. Best of luck to you and the kit is beautiful!
 

KenB

Senior Member
Joined
Oct 12, 2007
Posts
1,254
Reaction score
2
What do you like about the contours better? How's the sound quality compared to GoPros?

Pretty much everything. I like the lipstick form factor, I like the quick slide on top. You always know for sure if you are recording or not.

I like that it has bluetooth built in and I can stream right to my phone so I can make sure the camera is lined up. To me it's just a better built piece overall.

Never was a fan of the go pro plastic box. The Contour just seems to be a nicer piece. Also has an HDMI port built in.

Sounds awesome!!! I saw you guys run out at SGMP! Hoping to have my car at the next mile event. Best of luck to you and the kit is beautiful!


Thanks but we weren't at SGMP.
 
Last edited by a moderator:

TurboS197

Junior Member
Joined
May 5, 2011
Posts
42
Reaction score
0
Pretty much everything. I like the lipstick form factor, I like the quick slide on top. You always know for sure if you are recording or not.

I like that it has bluetooth built in and I can stream right to my phone so I can make sure the camera is lined up. To me it's just a better built piece overall.

Never was a fan of the go pro plastic box. The Contour just seems to be a nicer piece. Also has an HDMI port built in.




Thanks but we weren't at SGMP.

Wow... I just realized I think that was the Hellion car. Sorry about that... either way your kit is much cleaner in appearance and the performance definitely says it all! Great job!
 

COYO TT

Stangless
Joined
Jan 25, 2011
Posts
1,698
Reaction score
0
Location
Annapolis MD
Wow... I just realized I think that was the Hellion car. Sorry about that... either way your kit is much cleaner in appearance and the performance definitely says it all! Great job!
:thud:

If it was Ken, you would see him running it down the track, not parked beside it all weekend....lol
 
Back
Top