What have you done to your mustang today?

[Jinx]

I can't even. Darren makes me foam-out-of-the-mouth-furious with his modifications on his 1:1 diecast Mustang.

I really, truly, wonder if this car has even touched a state maintained roadway of any sort. I mean, I like seeing before and after installs of parts onto a car that basically is white glove (or sock) type of clean with a backdrop thats always the same.

 

[UltraKla$$ic]

LIKE A BOSS!!!!!!!! 302R that is!!!! Suck it HATERZZZZZ!!!!

 

[nyuk98GT]

Darren,

Nice install!

What's the blue painter's tape thing-a-ma-jig at the front of the Boss intake? Is it awaiting a connection?

Not criticizing but I am wondering if that air filter is not looking as fresh as it should?

Chris

 

[Black3vGT]

i can't even. Darren makes me foam-out-of-the-mouth-furious with his modifications on his 1:1 diecast mustang.

Hahahaha

 

[UltraKla$$ic]

Darren,

Nice install!

What's the blue painter's tape thing-a-ma-jig at the front of the Boss intake? Is it awaiting a connection?

Not criticizing but I am wondering if that air filter is not looking as fresh as it should?

Chris

Yes, I had to run to the auto parts store for some vacuum caps for the Boss Intake and Steeda CAI.

 

[nyuk98GT]

There, that's better. Back to the UltraKla$$ic standard we have come to expect.

Chris

... although that chartreuse MF towel has to go. I mean, please!!

 

[Paul.]

I just signed up for a 1/2 mile drag race event at a local airport in a few weeks. My buddy signed up in his 700 hp Shelby too.

 

[jumbowolfe]

Yes, us non-brembo people need brake love too. Installed some new pads and drilled/slotted rotors.

 

[claudermilk]

Idling mist......

You start it and let it idle!? That will get oil and gas and carbon on the pristine insides of that engine! Madness! Then think about that perfectly level exhaust!

 

[Scott]

Disaster was averted yesterday!

Put my car up on stands for the winter build and noticed a small puddle of transmission fluid under the pan. Applying some light under the car revealed the pan drain bolt was vibrating loose. Looks as if it has loosened a ¼” or so from fully seated.



While I have not crawled under to take a close look from the pictures it would appear the fiber gasket on the drain bolt is eroding away. Very strange. Can’t remember if the bolt and washer came with the Performance Automatic deep pan or if it was transferred from the OEM pan, in any event a new gasket is in order.

 

[06Rousher]

Started some work on my trunk that was looking pretty rough. Probably use this as an excuse to put in a small system.

And yes the trunk matches the steering wheel!

Sick as fuck! I love the look, what did you use to hold down the wood?

 

[Gabe]

Decided I'm gonna get the AMR's in charcoal for my car.

20x10 in the rear - LOVE that $139/piece price on them right now
19x10 in the front

305/35/20 Nitto 555R drag radials in the rear
275/40/19 Yokohama S.Drive tires in the front

Gonna be giving business to American Muscle (wheels), Discount Tire Direct (tires) and Tire Rack (TPMS sensors) .... spreading the wealth, lol

And I have the whole winter to put it all together.

Now. Any deals on T56 Magnum XL kits?

 

[Gabe]

Just ordered 4 new Billet Technology oil catch cans during their Countdown Sale ... 2 for my car, 2 for the GF's .... now just need to figure out how to make them work with these cars .... they're meant for Dodge Chargers, lol
I know JLT makes a kit for Roush blowers to use their cans on the side of the blower ... gonna probably end up with a couple of those kits plus some custom work for the driver side cans ...

 

[itonano]

Received the GT500 fuel pump!!

 

[AnotherS197GT]

ordered some 2013/14 GT500 rotors. Just need to pick up those brackets now.

 

[SNKPWR]

Speed dawg knob. $38 for knob and adapter on Amazon. Score!

 

[Sactown]

Personally I have not done anything to the Mustang, but the shop installed new rear adjustable shocks, 2-Step, and a Bump-box

 

[Black3vGT]

Sick as fuck! I love the look, what did you use to hold down the wood?

Thanks. 1/2" piece of mdf cut to the shape of the trunk and the wood is glued on using liquid nails.

 

[Shotokan1509]

More than likely drove it last night for last time this season, I usually put away on Thanksgiving and we're supposed to get 6+" of snow today

 

[Scott_0]

removed the Barton shifter so I can take it in for possible warranty work on the mt82 shit box