What have you done to your mustang today?

[Kuplex]

Scheduled my car to get the windshield replaced. Lots of chips and light scratches everywhere. Thry really pose a glare issue at night sometimes.

 

[groundpounder]

Upgraded my rear brakes with the NC Mustang Parts brackets and some 13.8" very low mile take off '14 GT500 rotors.

Before:

After:

Combined with the 14" Brembos on the front I notice less nose dive when hard on the brakes. Not bad for $120 all in and 1.5hrs of work.

 

[JEWC_Motorsports]

Installed a Corbeau race seat, MMR seat delete, and BMR bolt in anti roll bar. Also finally got to put the new Weld wheels on the car. Track time tonight.

 

[Bill220]

Got the rest of the blower installed, installed fuel rails and 39lb injectors, did some wiring. Getting there. Still have to install Aeroforce gauge (pain in the ass boost sensor), fuel pump and a couple of other small things.

 

[06 T-RED S/C GT]

Upgraded my rear brakes with the NC Mustang Parts brackets and some 13.8" very low mile take off '14 GT500 rotors.

Before:

After:

Combined with the 14" Brembos on the front I notice less nose dive when hard on the brakes. Not bad for $120 all in and 1.5hrs of work.

Congrats

 

[ha1234]

Replaced the grommets under the cowl -- hopefully no more leaks!

 

[o2sys]

Replaced the grommets under the cowl -- hopefully no more leaks!

Did you get the revised ones that use the heat gun to seal?

 

[oldVOR]

Did you get the revised ones that use the heat gun to seal?

What revised ones?
Have a part number?
I just bought some from Ford and they are only self stick.

 

[o2sys]

9R3Z-63517C58-A are the ones that need heat applied to be sealed.

My 07 came with self stick foam which dries up and fails causing the leak.

 

[AndrewNagle]

New JVC head unit and amp already have kicker speakers, stereo is now night and day

JVC KW-V820BT HU with JL XD 800/8 Amp

love the car play with my iPhone

 

[06JET]

Nice clean radio install AndrewNagle. I installed one with DVD and a back up camera last summer and it really sounds great with my factory speakers. I'm sure yours sounds awesome.

 

[AndrewNagle]

Nice clean radio install AndrewNagle. I installed one with DVD and a back up camera last summer and it really sounds great with my factory speakers. I'm sure yours sounds awesome.

Thanks it is Night and day. Ended up having the local stereo folks do it. It is an 8 channel amp and the kid who did the install did a super job dialing it it. So good I went back an hour later and gave him a little cash for a job well done.

 

[Bill220]

New JVC head unit and amp already have kicker speakers, stereo is now night and day

JVC KW-V820BT HU with JL XD 800/8 Amp

love the car play with my iPhone

Looks great! How much RMS power are the amps pushing?

I was going to put a new head unit in for navigation and front/back cameras but decided against it. Mostly because I ran out of money but partly because I like the stock unit as is sound-wise. I mostly listen to the exhaust note anyway, lol. I found a little contraption on Amazon that I can plug into the aux jack in the console (I have an '09) for bluetooth capability that I thought about getting but I can just plug it in, doesn't bother me.

 

[AndrewNagle]

Looks great! How much RMS power are the amps pushing?

I am definitely not an audio head but these are the specs from their website


14.4 volts
@ 4 Ω 75 watts RMS x 8
@ 2 Ω 100 watts RMS x 8
@ bridged 4 Ω 200 watts RMS x 8

 

[Bill220]

I am definitely not an audio head but these are the specs from their website


14.4 volts
@ 4 Ω 75 watts RMS x 8
@ 2 Ω 100 watts RMS x 8
@ bridged 4 Ω 200 watts RMS x 8

That's a badass amp. I used to be into it big in the early 90's. Lost interest after a few years.

 

[rogcat1]

Windshield

Finally got new windshield after being sand blasted here in New Mexico.

 

[AndrewNagle]

started rear tow hook project

 

[Rasmus]

I ordered a tuned IC waterpump for GT500. No, really, it's been tuned...

http://www.lingenfelter.com/product/ST-1030002107.html

 

[ghunt81]

Got my '10-14 door panels (mostly) in tonight. Driver's side is in and hooked up, passenger side was super warped (I think the donor car was wrecked on that side) so I have it partially installed with the door shut, hoping that will straighten it out a bit. No pics ATM because it was dark and I couldn't get any good ones. I am planning on doing a writeup on it.

 

[Bill220]

Got my '10-14 door panels (mostly) in tonight. Driver's side is in and hooked up, passenger side was super warped (I think the donor car was wrecked on that side) so I have it partially installed with the door shut, hoping that will straighten it out a bit. No pics ATM because it was dark and I couldn't get any good ones. I am planning on doing a writeup on it.

I personally have no interest in doing the door panel thing but I wanted to comment that I admire the creativity and confidence you must have in order to do this project and the S550 brakes you mention in your signature. That's pretty cool.