Search results for query: *

Why do ACs always take a shit during the summer? LOL I don't know anything about compressors. Is this one dead? Sure made a mess.

Finally upgraded from the 'ol SCT 2 to an X4. Going to upload a custom tune to the X4 and then load to the car so I can marry the X4 (same tune that's in the car now). Is there any need to move the stock tune from the SCT 2 to the PCM and to the X4? The car will never be able to use the stock...

My next two upgrades are a KB Mammoth and a T56. It was going to be in that order, but my rear main is leaking (just had it "fixed" in Aug 2019). So I think I have to rearrange my priorities as I don't want to pay to have the tranny dropped twice. Figured do the tranny upgrade now, fix the rear...

Yes....many threads on this, I've bookmarked them all across multiple forums. There's always differing opinions and different ways to do things. I've combined a few different ways to do this along with borrowing the chart from tmcolegr with my edits and this is what I'm getting ready to do...

Getting the Cervinis Cobra R Hood. Could have Cervinis paint it for $550. Car's been painted before factory color by this same shop, but there's always variations. Below are quotes for hood only and hood and fender blending. Both seem rather high but costs are going up with everything...

(sp Woes) Let me preface with I hate electrical gremlins like everyone else. Latest issue has to do with power to the front turn signal assemblies. The right side does not have power to the parking light (large bulb) (center post on the plug), but has power to the turn signal (same bulb)...

Got bored so swapped out plugs, did compression/leak down and played with the new borescope which is not top quality and couldn't get pictures of the valves. But does have a side camera and have close ups of the pistons. Unfortunately my lack of experience limits my interpretation on what I...

Noticed my fan wasn't working and attributed to high temp relay and changed it. Temp seemed o.k. until the weather went into the 90s. Car was running hot, low speed fan not turning on. Swapped relays around, checked the 40A fuse and BEC, all are fine. I have jumper on the high speed fan and...

Looking for some advise for tire clearance combined with street driving and racing. Disclaimer is I'm not switching to a smaller tire simply because the largest size down M/T would be a 295/60. I'd like a 315 but only come in 60 or 65 and I want to stick with a 28" tire, mainly due to the 4.10...

325/50 15 M/T ET Street R 3555 (radial) Out of 4 tires, one balanced o.k. needing 5oz and a Road Force of 30. The other three required 10+ oz with the last one requiring 30oz of weights and a Road Force of 80+. Damn things were wobbling all over the machine. Crazy...I just need two tires. A...

I have two sensors, oil pressure and oil temp. Oil pressure has always worked, but not temp. Thinking it's my ground wiring. In the diagram below, I have Black-2 from the sensor going to the Black on the right of the 5V Reg. The Black on the left of the Reg goes to a ground. I'm thinking...

How do I get this bolt out of here? BMR K-Member. Bolt turns with a breaker bar. How do I pull it out of there? Figured out that I "think" the bolt is seized to the sleeve in the bushing and that's what's turning. The right side came off no problem. Did some reading on seized bolts in...

I know, probably simple, but haven't looked at this for years. Conical lug on Weld R-TS S71 (17") lost a few threads but the stud is fine. Found these Gorilla Spline 1\2" - 20 from other wheels in the garage. Will they work on these wheels until I can get a new set? Seem narrow. Sent from...

Been searching the web without much luck. Need a 4.5" to 5", 3" in length silicone reducer in blue. I have one that wore out from HoseTechniques but they don't carry blue in that size anymore. Only one I can find is from HPS but they want $65. :handjob: Anyone know where to get one?

Anyone know places that sells these or who makes them? Eaton? I did find a couple of places and the price has doubled since I last bought one. Just looking for other options before dropping $100+ for it.

Anyone have one? Thx....

I have a new HU (Android off brand) and wired in a reverse camera. If I have the video cable plugged in the the "Camera" RCA input, nothing happens when I go into reverse or if I select video through the HU AUX option. If I plug in the video cable in the "AUX" RCA input, the camera...

But they don't make them like they used to: nq2jY1trxqg?rel=0

I'd like to clean these up to it's original brushed steel look. I know I could polish it somehow to a shinny finish, but not what I want. These are water marks after it got shipped back from Europe. I haven't tried anything yet because I don't want to mess it up. Any advise would be...

Do the OEM bolts work with this diff cover? Took it off the car a couple of years ago and can't remember if there were specific bolts with it or just the OEM ones. :ugh1: TIA...

$600 - Beautiful wheels at a bargain price. Local Sale Only unless you want to pay shipping and you need to figure that out from 78130. Will drive a short distance to deliver or meet. Wheels have about 17K miles. Excellent condition except for a few imperfections on one wheel...

Not sure I'm going to have much luck here, but I'll give it a shot. I broke a threaded stud the front bumper cover bolts on to. There are two nuts accessed through the fender shield, #6 on attached diagram. That's one of the studs I broke. It seems like the piece that has the two studs on it...

So I'm swapping out my LCAs and noticed this. The right side shock looks like it's leaking. Left side is dry. Is it done for? If so, any advise of where to get a replacement? Thx...

Pypes Pype-Bomb Axle-Back Exhaust (05-10 GT, GT500) - <300 miles Excellent condition, original packaging. $200 plus PP and Shipping. Stock 05 - 09 Mustang GT Mufflers. <100 miles Excellent condition. $50 plus PP and Shipping.

This is cool. Keeps them off the streets. http://fox2now.com/2013/05/23/teen-girls-drag-race-at-gateway/?hpt=us_bn9