gt500

Hello, I have a 2014 Mustang, and I've had this annoying rattle by the driver side door sill for over a year now. It started out as a clunk whenever my driver side front wheel would hit bumps at low speeds. Whatever was clunking became completely loose and can now move back and forth as I...

2020+ GT500 Guys! Headers, Catbacks and Resonator Deletes in stock ready to go here @ Beefcake Racing! You know we have to show off those Weld Belmont's on our Shop Car Apocalypse! Stainless Works 2" Headers, Redline and Legend Catbacks - Black tip or Polished Tip...

2020+ GT500 Guys! Headers, Catbacks and Resonator Deletes in stock ready to go here @ Beefcake Racing! You know we have to show off those Weld Belmont's on our Shop Car Apocalypse! Stainless Works 2" Headers, Redline and Legend Catbacks - Black tip or Polished Tip...

Prefer 2.4 press on or stock, unless you have a VMP complete kit. (Hub and pulley) Thanks

I have a GT500 cluster in my Bullitt. I’m getting ready to go boosted and I’m curious if anyone has ever heard of someone getting the boost gauge on the cluster to work. I already have a Prosport boost gauge installed, but would like to get the gauge in the cluster working for shits and...

Ok, do you think it is wise to put a stock GT500 on the dyno, that has 100k miles? 1: Will it survive? 2: Is the data gathered thorough enough to help locate problems that an A.S.E. Mechanic could find anyway? 3: Do they help tweak or just point you in the right direction? Thanks.

I was wondering if it's a better deal to just buy a gt 500 any year between 11 - 14 or get a gt between 13 - 14. I can get a 13 gt for around 17k to 24k with decent milage. I can get a gt500 with a similar milage for around 30k to 40k. There's also the boss 302 but idk what's the advantages of...

About a year and a half ago, I threw on some Napa GT500 brakes onto my 07 GT. They were a direct swap, and even easier to deal with than the factory GT calipers. They carry a lifetime warranty, were significantly less than big brake kits, and so far, have held up to 17k miles of street use, two...

Well after much debate and feedback I was convinced, actually educated by members of this forum, I brought home my newest S197 Mustang. I will eventually list the detailed specifications of my car but for now just an introduction. Sitting on 20" Giovanna rims and Pirelli P Zero rubber is my new...

Okay guys here's your chance to tell me my idea sucks, is gay, or just down right stupid. For some reason I might regret this! So I gotta get a plate for my new baby it's a 2008 GT500 with a boat load of upgrades and has dyno'd as high as 700hp to the rear wheels. I don't normally like bringing...

I got a set of Ford GT500 factory HID Headlights from an '08. When I plug them into my '07 GT500 harness they light up for 3 seconds then shut off. Doesn't matter running or not. Could this be due to CANBUS or lack there of? All manual, no DRL. Anyone have any experience with this? TIA.

I’m looking to see if there’s anyone in or around the Los Angeles that would be willing to rent out or allow me to use their SC pulley removal/installation tool for my 2008 GT500 I don’t mind if I have use the tool at your place of residence to insure the tool is not stolen or damaged... I just...

Typically I wouldn’t post about a pair of mufflers, but I’m so damn impressed by AWE that I’m going to make an exception. I have an ‘11 GT500, and it’s loud -- think lots of boost through a healthy exhaust. My old mufflers, Borla ATAKs, sounded okay at best, but they weren't quite aggressive...

Hey guys, it's been a long since I've been here. Life, kids etc. I've read a lot on here about this topic, but need this hopefully simple question answered. Anyhow, finally going to lower my car and just wondering would this be a good time to replace a front or rear sway bar as well (2006 Gt...

As stated, intercooler hoses from 13-14 GT500 LMK what ya got, thanks Dennis