08 Stroker 3v need 8 hole flexplate

[Shakn68]

I need advice for an 8 hole SFI flexplate for my 08 stroked 3V with a 5R55S automatic trans. None are listed since the 3v all had 6 hole stock cranks. Going with a Hughes stall converter. Will any of the 8 hole internal balanced flexplates for earlier, or later year mod motors work? Please advise...

 

[msvela448]

Yes... I used a flywheel from an 03 Cobra for mine... So if you can find an automatic car with an 8-bolt Ford modular V8 it should fit... Just check the tooth count / diameter is the same for starter engagement. Maybe a flex plate from an automatic GT500?

Sent from my SM-N975U using Tapatalk

 

[RED09GT]

164 tooth/8 bolt is what you are looking for. Summit Racing sells an SFI one for like $70.
https://www.summitracing.com/parts/sum-g114sfi/make/ford

 

[Shakn68]

Thank you all for the good advice.