BBR Testing with Ford Racing Intake Manifold

[Jarrod@latemodelresto]

Hell I think I might be doing it for you

If you want that set up let me know. We can work a deal, if your serious PM about it!

 

[Fast64ranchero]

excellent. did you put the bigger throttle body on it as well? if so how much extra is the tb?
if i get one of these intakes, ill be retaining the stock tb.

Car has a 60mm gt500 TB and a BBR spacer,

 

[Konablue10Gt]

Im surprised you guys picked up so much with the new intake. I put one on a customer car and picked up 5 peak rwhp and lost 15 rwtq.
Here are the particulars

07 GT auto
410's
JBA long tubes
high flow cats
Stinger mufflers
JLT cold air
Gt500t/b w/BBR adapter
Hot Rod cams

In this state it made 307rwhp and 305 rwtq.

I installed the intake on the dyno, loaded a tune for runner deletes and ended up with 312 rwhp and 290 rwtq. I tried different spark advance, and different degrees of cam timing, but that was the most it would make. All of the datalogs looked good and the air/fuel was spot on for the before and after runs.

Im not trying to hijack a thread, just curious how yours picked up so much.

Thanks

 

[Dillon Dollar]

I talked to John at BBR today around 2 central time he and chris were supposed to strap my car on the dyno tonight ill let ya know first thing in the morning if it picked up any power on my setup

 

[kahmann]

Im surprised you guys picked up so much with the new intake. I put one on a customer car and picked up 5 peak rwhp and lost 15 rwtq.
Here are the particulars

07 GT auto
410's
JBA long tubes
high flow cats
Stinger mufflers
JLT cold air
Gt500t/b w/BBR adapter
Hot Rod cams

In this state it made 307rwhp and 305 rwtq.

I installed the intake on the dyno, loaded a tune for runner deletes and ended up with 312 rwhp and 290 rwtq. I tried different spark advance, and different degrees of cam timing, but that was the most it would make. All of the datalogs looked good and the air/fuel was spot on for the before and after runs.

Im not trying to hijack a thread, just curious how yours picked up so much.

Thanks

That is pretty interesting. I'm also curious as to why a car with these mods before the intake (C&L Racer CAI, BBR GT500 Throttle Body Kit, Underdrive Pulleys, Off Road X-pipe and JBA Axle Back) only made 267 rwhp...

 

[foolio2k4]

Does anyone know, if this is legal? Like for us Californians. Will this potentially fail during emissions?

 

[Greg Hazlett]

That is pretty interesting. I'm also curious as to why a car with these mods before the intake (C&L Racer CAI, BBR GT500 Throttle Body Kit, Underdrive Pulleys, Off Road X-pipe and JBA Axle Back) only made 267 rwhp...

That is right on par for being an auto..mine only put down 244 bone stock..the TC/410 gears kills the numbers.

 

[one eyed willy]

Does anyone know, if this is legal? Like for us Californians. Will this potentially fail during emissions?

i dont see how it could, everything hooks up like stock,shoudnt have any effect on emissions at all!

 

[05yellowgt]

i dont see how it could, everything hooks up like stock,shoudnt have any effect on emissions at all!

None of that matters if said product doesn't have a CARB sticker.

 

[one eyed willy]

None of that matters if said product doesn't have a CARB sticker.

do they currently look for carb stickers on the stock intake? why would they look for one on this intake.....its pretty factory looking other than the "ford racing" logo.....guess it depends on how hip the inspector is?

 

[JeremyH]

Its def all up to the inspector. I had them fail me, tell me there was no carb stamps on my cats (kooks/pypes) and i called around to find cats i could weld in and guess what none of them have make cats that have carb stamps lol. Took it somewhere else, no problem.

 

[RRRoamer]

i called around to find cats i could weld in and guess what none of them have make cats that have carb stamps lol. Took it somewhere else, no problem.

That doesn't surprise me at all. What WOULD surprise the hell out of me was if someone actually made high flow cats that COULD pass and get a CARB stamp.

I'm not surprised that someone else would let it pass either... Par for course.

 

[Boorail85]

I talked to John at BBR today around 2 central time he and chris were supposed to strap my car on the dyno tonight ill let ya know first thing in the morning if it picked up any power on my setup

Have an update for us?

 

[Fast64ranchero]

Have an update for us?

Dyno is down, waiting for parts. Sucks for Dillon...

 

[S197gt07]

^thats sad

 

[Dillon Dollar]

Dyno is down, waiting for parts. Sucks for Dillon...

Yeah does suck but its ok my car is in good hand just have to be partient for the numbers i think i will have them by monday

 

[KcMstang]

Strapped my car to a dyno on Saturday and put now 315rwhp with full exhaust, HR cams, and JLT intake (Brenspeed tune). I'm looking into this intake cause I need to get CMDP done but figure this would be the best route.

 

[Dillon Dollar]

yeah i think the intake will be a very good rougte hopefully ill post my dyno numbers up in a few hours

 

[06GTMustang89]

any updates?

 

[KcMstang]

Still waiting...trying to decide if the intake it worth the cash on n/a setups!