Combined 15" wheel Fitment Thread

[gijosh28]

Man that car is starting to really come together with the rims and that hood. The rears definately need to be a bit taller.

 

[NotQuik]

looks ok..

Okayyyyy....car looks great man

 

[Chris06GT]

A 28" in back and a 27" in front will look good with some BMR springs or Pro Kit

 

[screamingstang]

A 28" in back and a 27" in front will look good with some BMR springs or Pro Kit

thanks...im going to look into the bmr and prokit...

 

[xtweakerx]

did everyone else also put weights on their wheels w/ the rear ET Streets? for some reason both my rear tires required a decent amount of weight to balance properly, it was even though the amount of weight for both rear tires, the et fronts were nearly perfect not requiring much weight on the fronts

 

[biz4765]

Not sure what the rear wheels weigh but ET Street Drag radials are like 31lbs each.

 

[xtweakerx]

what no, im talking about the actual "Weight" you put on the rim to balance the tire/rim when mounting.

 

[biz4765]

Sorry I misread thinking you asked if anyone weighed their wheels/tires.

 

[Matt D]

what no, im talking about the actual "Weight" you put on the rim to balance the tire/rim when mounting.

I have no weights up front... the stick on led ones wont clear my calipers lol

 

[xtweakerx]

i dont have the stick on's, i have the kind that clip onto the edge of the rim, u got weights no your back ET Streets matt?

 

[Matt D]

i dont have the stick on's, i have the kind that clip onto the edge of the rim, u got weights no your back ET Streets matt?

The rears I have weights

 

[xtweakerx]

cool, i tested out the wheels+tire today during lunch, bolted em up and went for drive everything seem's A-OK!

 

[Matt D]

only thing with my fronts is they are both angled out a bit I cant figure this out -_- I have had like 3 alignments

 

[GI Joe]

only thing with my fronts is they are both angled out a bit I cant figure this out -_- I have had like 3 alignments

camber plates?

 

[Matt D]

camber plates?

have em... I have the Qa1's but the plates go under the strut tower so there isn't much play.. Maybe I need to used camber bolts aswell down low to make them straight.. I hate it

 

[xtweakerx]

more and more reasons i still have stock springs.

 

[gijosh28]

have em... I have the Qa1's but the plates go under the strut tower so there isn't much play.. Maybe I need to used camber bolts aswell down low to make them straight.. I hate it

Funny mine do the same thing. I have eibach pros, tokico d-specs, steeda bumpsteer kit, and mm cc plates. Even after the alignment they seemed like they were angled out to me.

 

[GI Joe]

have em... I have the Qa1's but the plates go under the strut tower so there isn't much play.. Maybe I need to used camber bolts aswell down low to make them straight.. I hate it

I had to use both...sure did...

 

[navbtcret]

I just got off the phone with Race Star Industries. They have a direct bolt on 15" street/strip rim available for our s197 Mustangs. Some of the sizes are available now and the 15x10's will be available the second or third week in October. These are one peice cast aluminum rims, the fronts weigh 10lbs. and the rears weigh 13lbs. This is for real and about time someone came through for us Mustang owners. They are very reasonable priced also. You do not need longer studs for the rears neither, these fit the stock studs.

Here is a link to their website.

http://www.racestarindustries.com/


Feel free to call them, they will put you on their list and call you when the rim size you want comes in, I am already on the list. They were very helpful with me and actually called me back right away too.

 

[Chris06GT]

Look like Greg Weld's....If they fit good, without any issue's...count me in for sure....damn nice wheel and nice price....