Flat black oil filter relocation kit

[Greg Hazlett]

Jeremy is unavailable until mid Jan 2014.

 

[07Bandit]

So, I finally got around to installing this today but the lines coming out of the stock filter location actually hit the sway bar (see attached). Do you have a different set of connectors I could throw on the AN lines that are a 90 or 45 degree option?

Had the same problem when I pieced my kit together. I changed the fittings out of the adapter to 90 Degree 3/8 to 8an fittings. You can pick up the summit ones cheap and solved all my issues with the swaybar. Sorry I don't have a picture handy.

 

[krang00]

Ahhh, so 3/8 to 8AN will do the trick out of the oil plate adapter then... I'll order a set of those. Thanks for the input 07Bandit! This should really be standard issue for this kit

 

[07Bandit]

Ahhh, so 3/8 to 8AN will do the trick out of the oil plate adapter then... I'll order a set of those. Thanks for the input 07Bandit! This should really be standard issue for this kit

I used 8an line when I did my setup. Just make sure what size an line you have and order the right fittings.

 

[JeremyH]

In stock.

 

[JeremyH]

Ahhh, so 3/8 to 8AN will do the trick out of the oil plate adapter then... I'll order a set of those. Thanks for the input 07Bandit! This should really be standard issue for this kit

This kit uses 1/2npt to 8an fittings at the adaptor.

You would just need some 90 degree 8an hose ends for your setup.

Pm sent.

 

[stoneblue]

Would this kit fit a 2006 4.0?

 

[JeremyH]

Would this kit fit a 2006 4.0?

Yes.

 

[JeremyH]

ttt.