front splitters available? may have a solution but need pics!

[Department Of Boost]

Yeah, that sounds like a good setup. And the pricing is right. I have made a few splitters now and I would pay that so I didn’t have to do it again!

 

[Sky Render]

Do you make splitters that fit 2010 and up?

 

[Roadracer350]

wow that sounds like a better quality peice than any Ive seen lately. All made in house?

Yep all hand made in house.

 

[Roadracer350]

Do you make splitters that fit 2010 and up?

If I can get a new model to get a template off of yes. I only have 1 template right now but a buddy is a local Ford mech and I will see if I can get one made up. What kind of front air dam/chin spoiler are you running? If its anything like the CDC agressive this will work.

 

[Roadracer350]

OK guys I am hopeing to have pics up by Monday. I have a 4x8 sheet coming today at 1630 and I will document it with pictures and post up!

 

[POS VETT]

Holy hell. Screw the splitter, I want that cross brace !

 

[Roadracer350]

That wouldn't be that hard to make. I have a copy of this pic printed and while i'm under the car this weekend I will get some measurements. Simple enough piece. Majority of it can be Water Jetted out then just a little machining and tapping.

 

[leviathon]

I like this guy lol

That wouldn't be that hard to make. I have a copy of this pic printed and while i'm under the car this weekend I will get some measurements. Simple enough piece. Majority of it can be Water Jetted out then just a little machining and tapping.

 

[Roadracer350]

Im all about if they say I cant buy it or its to expensive screw em im gona make it myself!! Unobtiamium? Pissh! Get me a pic and some measurments and watch the chips n sparks fly!!

 

[leviathon]

I want 3 peice forged wheels for under 200 bucks!!

Im all about if they say I cant buy it or its to expensive screw em im gona make it myself!! Unobtiamium? Pissh! Get me a pic and some measurments and watch the chips n sparks fly!!

 

[Roadracer350]

For 200 I can make them but they will be out of wood or plastic!

 

[leviathon]

lol damn!!!

 

[Department Of Boost]

That wouldn't be that hard to make. I have a copy of this pic printed and while i'm under the car this weekend I will get some measurements. Simple enough piece. Majority of it can be Water Jetted out then just a little machining and tapping.

The back side (top) of that X brace is relieved (perfect for dropping tools/fasteners into!) to lighten it up. You would need to get it in a mill too.

 

[Roadracer350]

I have a 5 axis CNC here in the shop so not a problem.

 

[zquez]

Agreed. This thing is NICE.

 

[Roadracer350]

Here are a couple toys I made. one is a 6061 solid Golf Ball and the other 2 are a .50BMG rounds I made to see how they would shoot. I drilled the back to put a piece of tungsten in to give them a little more ompf!

 

[zquez]

Here are a couple toys I made. one is a 6061 solid Golf Ball and the other 2 are a .50BMG rounds I made to see how they would shoot. I drilled the back to put a piece of tungsten in to give them a little more ompf!

Well, how did they shoot? lol

 

[Roadracer350]

Pretty good actually! They still didn't have the same impact as the Naval Bronze/Tungsten I did but they did OK. They were around .125" grouping for 3 shots at 750 yards and about .375" at 1000. The bronze rounds kept their energy all the way to 1000 and had about .1875" with 3 shots. Here is a crappy cell pic with the short barrel on. I have since put on a 40" barrel and that's what I was using to get the numbers.

 

[Department Of Boost]

Here are a couple toys I made. one is a 6061 solid Golf Ball and the other 2 are a .50BMG rounds I made to see how they would shoot. I drilled the back to put a piece of tungsten in to give them a little more ompf!

Love the golf ball! Those 50 bullets are pretty sweet too. I've heard that all the precision .50 BMG bullets have to be done on a lathe? Is that true?

Pretty good actually! They still didn't have the same impact as the Naval Bronze/Tungsten I did but they did OK. They were around .125" grouping for 3 shots at 750 yards and about .375" at 1000. The bronze rounds kept their energy all the way to 1000 and had about .1875" with 3 shots. Here is a crappy cell pic with the short barrel on. I have since put on a 40" barrel and that's what I was using to get the numbers.

I want a 50! Waaaaaaaaaaaaaaaaaaaa! Which one is that, I can't tell from the pic.

I got to run 10rds through a Barrett M107 a month or so ago. I know they aren’t as accurate as a bolt gun but being able to go “semi” for 5rds was life changing.

When I get one I don’t know if I will go bolt or semi. Probably bolt. But I would like to have both.

 

[Roadracer350]

Its the Anzio Light weight .50. Yea to get good ones that will reach out their you need them made on either a CNC lathe or by hand on a manual. I make mine on the manual here at work or if I want say a dozen or so we have some Omni Turn Screw Machines that I program and run them.