Installing a paxton novi 2200.

[Juiced 66]

I'm hoping to get mine to the tuner this saturday. I may have to wait till next week though, it just depends on if I have time to get it up there.

I decided to leave the stock clutch in it and see how long it will last. I have the RXT sitting here, but dont really want to pull the long tubes off to swap it out right now. Plus I dont want to pay $400 in labor for a shop to do it since christmas is coming up etc.. I dont drive the car that much, so if it'll last a couple of months I'll be happy. Knowing my luck, it'll go out while it's getting dyno tuned LOL !

 

[Kenaizer]

Haha no that would only happen if you didn't already have a spare!

 

[Kenaizer]

I'm gonna keep the 3.73s. I'm not much of a track racer, I'll be lucky to run at a track once a year. I've always had 3.73s in my mustangs so I doubt that will change. I'm definitely going to get some drag radials soon though. I think the Nitto NT05s will hook well on the street. As long as I can get around 8000 miles out of them, I will be happy.

Hey that would be 1000 more than I got out of the stock Pirellis on my '11 5.0!

 

[KalEl370]

I'm hoping to get mine to the tuner this saturday. I may have to wait till next week though, it just depends on if I have time to get it up there.

I decided to leave the stock clutch in it and see how long it will last. I have the RXT sitting here, but dont really want to pull the long tubes off to swap it out right now. Plus I dont want to pay $400 in labor for a shop to do it since christmas is coming up etc.. I dont drive the car that much, so if it'll last a couple of months I'll be happy. Knowing my luck, it'll go out while it's getting dyno tuned LOL !

I'm still on my stock clutch, so far it's lasted about 1500 miles with the Paxton and feels fine. I don't drive mine a whole lot since I have a work vehicle, but I give it hell on the weekends!

 

[Kaane]

Tuner emailed me.

First pull.... IC Pipe blows off....
Second pull... different IC Pipe blows off.
Third pull makes 569/434 and a IC pipe blows off....

Sigh...

Looks like 570/435 is it. Didnt quite make 600whp, but I have stock exhaust so still great numbers. Only revved to 7K, could probably make 600whp at 7300.

I will upload a video and a dynosheet when I get them.

Time to buy some T-Bolt Clamps.

 

[Kaane]

Here is a dyno video.

http://www.youtube.com/watch?v=VFtHxBvlAo4&list=UUovPSnhTNpwo7YLt9QLow9g&index=1&feature=plcp

 

[Kenaizer]

Still pretty good numbers! I emailed Shaun at AED a little bit ago so hopefully I'll be running before too long. It'll just end up costing me more than I had hoped.

 

[KalEl370]

Here is a dyno video.

http://www.youtube.com/watch?v=VFtHxBvlAo4&list=UUovPSnhTNpwo7YLt9QLow9g&index=1&feature=plcp

Not bad! Especially going through the stock exhaust.

 

[MindIfISmoke?]

I'm hoping to get mine to the tuner this saturday. I may have to wait till next week though, it just depends on if I have time to get it up there.

I decided to leave the stock clutch in it and see how long it will last. I have the RXT sitting here, but dont really want to pull the long tubes off to swap it out right now. Plus I dont want to pay $400 in labor for a shop to do it since christmas is coming up etc.. I dont drive the car that much, so if it'll last a couple of months I'll be happy. Knowing my luck, it'll go out while it's getting dyno tuned LOL !

You dont have to pull the headers to drop the tranny. Its super easy

Sent from my DROID RAZR using Tapatalk 2

 

[Juiced 66]

You dont have to pull the headers to drop the tranny. Its super easy

Sent from my DROID RAZR using Tapatalk 2

Even with long tubes ?

 

[Kaane]

Here is my before and after dyno sheets.

 

[Kenaizer]

Here is my before and after dyno sheets.

Great gains! Haha I didn't realize they were befor/after numbers and only looked at the top numbers.

 

[MindIfISmoke?]

Even with long tubes ?

Even with long tubes

Sent from my DROID RAZR using Tapatalk 2

 

[Juiced 66]

Even with long tubes

Sent from my DROID RAZR using Tapatalk 2

You just made my day !

 

[Kenaizer]

Yeah that's good to know for in about a week or two mine goes..

Just got the final tune! Can't wait to try it out tomorrow.

 

[KalEl370]

Yeah that's good to know for in about a week or two mine goes..

Just got the final tune! Can't wait to try it out tomorrow.

Is this the AED tune?

 

[Juiced 66]

You guys are killing me !! Mine goes in Monday for a dyno tue. It's in the 50's during the day down here right now, I know the car would be running damn good right about now.

 

[Kenaizer]

Is this the AED tune?

No it's the Lund tune. When I spoke with Shaun he said it might take him a few days to get it lined out being a FI Boss. He helped me out a lot though, even though I am not a customer. Great guy.

Jon took time out of his Friday at the TX Mile to satisfy a bitchy customer(me) and I couldn't be more impressed with him or how he handled my case.

 

[KalEl370]

No it's the Lund tune. When I spoke with Shaun he said it might take him a few days to get it lined out being a FI Boss. He helped me out a lot though, even though I am not a customer. Great guy.

Jon took time out of his Friday at the TX Mile to satisfy a bitchy customer(me) and I couldn't be more impressed with him or how he handled my case.

Good deal. Let us know how that bad boy feels when you get that tune on!

 

[Kenaizer]

Well it's terrifying. 1st and 2nd rev like I lave the clutch engaged from 4000 to 7500 under anything over 1/2 throttle.

Definitely going to have to get some slicks and friendlier gears than 3.73s for the track.

All in all, it's perfect.