Installing a paxton novi 2200.

[Kenaizer]

I've met Tracy a few times at the local meets. Her Boss is so sick.

I'm strongly considering doing an auto swap like her.

 

[DSargent09]

I bought an add a fuse from auto zone. Ran the main power through the sound tube hole, across the engine bay near the top of fire wall. dropped it back down below the battery and in on the passenger side through a rubber fitting that you cut a nipple off of behind the splash shield and front tire.

The other two wires you hook up right below the gauge to the light switch and dimmer.

The vacuum line comes off the top of the BOV. I hope you ran that line ahead of time.

 

[chon]

Thanks DSarg.

I ran the vacuum line from the BOV to the vacuum tube on driver side of intake, per Paxton instructions. Can I tap off that line or should I just run that vacuum tube directly from BOV to gauge?

 

[DSargent09]

Tap off that line. The gauge should come with the needed T to do it.

 

[chon]

Thanks bro! Sounds easy enough. Didn't know the fuse panel was on the passenger side haha. First Mustang

 

[wbt]

Thanks for the heads up wbt. Got a story about it?

I have several. Hit me up on PM if you are interested.

 

[Kimura]

This thread needs more videos!

 

[UltraKla$$ic]

This thread needs more videos!

Winner winner chicken dinner!!!!!!!!! It's getting more boring than Mikey's "build" thread. lol

 

[DSargent09]

Videos of what? Racing, or building?? I can supply some racing to suffice for a little while.

 

[Kenaizer]

Videos of what? Racing, or building?? I can supply some racing to suffice for a little while.

Well?!

 

[chon]

Yes racing videos!!! Let me start!




OMG why they so fast???

 

[Kenaizer]

POWA!

 

[chon]

So much POWA they have to hold the cars back!!

 

[UltraKla$$ic]

Videos of what? Racing, or building?? I can supply some racing to suffice for a little while.

Lets hear that BOV!!!!!!!!!!

 

[thodge]

Iam doing away with my pcv system and just going to put breathers on. My ? is, on an automatic car what do you do with the 3/8 line that comes off the vacuum splitter that was tied into the pcv sytem and the intake tube?

 

[onebadgsx]

I still ran that to the intake. Cap off the other vacuum lines and run breathers

 

[thodge]

I still ran that to the intake. Cap off the other vacuum lines and run breathers

Did you put a one way check valve in?

 

[Kenaizer]

Did you put a one way check valve in?

If its ran to the intake tube, and not the manifold, the cap isn't required.

 

[onebadgsx]

Did you put a one way check valve in?

Yes. I did it like the manual says

 

[wiplash]

UGH! I've got a 2200SL coming this weekend. Trying to read through this whole thread so I don't have to ask a lot of repeated questions. I'll do my best