Installing a paxton novi 2200.

[onebadgsx]

I have a $20 off any order for this site so I figured it would be a good deal.

Cant be 50$ shipped. And 8 rib so its ready for when you step uo to the big boys

 

[beefcake]

if you do an 8 rib, you will need a longer bolt, but they will work

 

[Deleted member 162826]

Ok here's the weird thing. I did one of those submit a question to summit just to see what they said. Guy comes back and says Paxton/Vortech don't share the same parts?! Lol I have the email.. Ugh

Also I finally got my moroso catch can all routed the way I want it. I need to know what type of cap are you guys using to block off the intake so you don't get a boost leak? Also on the Paxton kit it came with some parts for the pass side PVC I beleive it is and there is a plastic reducer that goes from one size down to 3/8". It has another reducer but with a valve to close under boost. What size is the regular straight reducer, I need one for my drivers side, currently have the valve on so I could cut and install the lines.

 

[onebadgsx]

Ok here's the weird thing. I did one of those submit a question to summit just to see what they said. Guy comes back and says Paxton/Vortech don't share the same parts?! Lol I have the email.. Ugh

Also I finally got my moroso catch can all routed the way I want it. I need to know what type of cap are you guys using to block off the intake so you don't get a boost leak? Also on the Paxton kit it came with some parts for the pass side PVC I beleive it is and there is a plastic reducer that goes from one size down to 3/8". It has another reducer but with a valve to close under boost. What size is the regular straight reducer, I need one for my drivers side, currently have the valve on so I could cut and install the lines.

breathers and done....

 

[Deleted member 162826]

breathers and done....

Either way what are you using to cap the intake?

 

[onebadgsx]

Either way what are you using to cap the intake?

3/8" vacuum cap from vato zone

 

[fiveoh]

Anyone running the aeroforce boost module? What 5v source did you tap into?

 

[onebadgsx]

Anyone running the aeroforce boost module? What 5v source did you tap into?

I bought a 12v to 5v regulator. I couldnt find a good source

 

[onebadgsx]

Dont know where you are located but i do have one im not using in houston

 

[CMK720]

Well I'm about balls deep into this install of the paxton. All coolant hoses and fan are modified, which was easy and took two hours at most. The bracket and pulleys was a pain to say the least, spent about 5 hours on that, measuring all the spacers and all that crap.

Just waiting on the t-bolts to arrive so I can start on the piping. Then the rest of the install shouldn't be too bad.

About to go the auto parts store now and get the wiring needed to hook up the vortec BAP and grab some breathers.

 

[Deleted member 162826]

Who here is running the Tial 50mm bov and Tial 44mm wastegate?

 

[Blazer707@TBR]

Im running the tial BOV and have the wastegate setup but have not put it on yet.

 

[onebadgsx]

Who here is running the Tial 50mm bov and Tial 44mm wastegate?

tial bov only here

 

[Deleted member 162826]

Sounds crazy but did you try and retune after? My understanding is the maf frequency will be much smoother during blow off, wondering if anything can be made better in the tune because of this?

 

[fiveoh]

Does anyone have a data log from a Paxton to 7500 rpms they can send me? I'd prefer one with a stock pulley but I'll take whatever.

 

[Midnight11]

What plugs are everyone running?

 

[DTL]

NGK 6510 gapped at .032"

 

[Deleted member 162826]

NGK 6510 gapped at .032"

Same here. Was told that .30 would be better by my tuner but not sure.

 

[beefcake]

either the ngk 6510 or brisk rr14ys 30 to 32 is good

 

[onebadgsx]

so my paxton intercooler isnt keeping up with the new YSI, iats hitting 176 at 21 psi, so im moving on the a larger intercooler.

http://chiseledperformance.net/intercoolers.htm

the air to air is good to 1800 cfm and 1300 hp. so hopefully this will do the trick. ill update with pics when i do the swap