J&M Plates popping

[Makdaddy]

I just got the Prodamper setup installed with Sportlines and J&M caster plates
Added a UMI Third member, Lower rear LCA mounts and Metco LCA
got it back from alignment
I hear a pop when i make turns from the front

I suspect it is normal from what I have read
But it still concerns me

 

[danbev07]

did it pop prior to your alignment?

i'm pretty sure the spherical bearings went out on mine. J&M, as far as I remember, has a lifetime warranty on the plates. I just need to send them back.

Check your strut rod nuts (middle of plates, accessible through the engine bay).

 

[Makdaddy]

No popping before But I was all stock
This a brand new Eibach Strut and Spring setup Pro Damper

So I was not sure what to expect other then the stiffer ride and better handling.
The popping is annoying
Ill check the struts out, but im sure they are put together correctly?

Maybe it is the camber plates?

 

[stang389]

have you checked the sway bar endlinks to ensure they are tight?

 

[Makdaddy]

have you checked the sway bar endlinks to ensure they are tight?

I will add that to my to do list

 

[AlbertD]

I have the j&m plates on my setup and I don't have any popping sounds. I would also check and make sure that everything was torqued down properly.

 

[Makdaddy]

I have the j&m plates on my setup and I don't have any popping sounds. I would also check and make sure that everything was torqued down properly.

Thanks 281 that was the confirmation i was looking for

I def need to investigate further this weekend

 

[ArizonaGT]

Make sure you get the top nut on the strut torqued to spec, the front suspension has to be loaded to achieve this.

 

[Makdaddy]

OHHHHHHHH

Stupid alignment shop

 

[jymontoya]

Holy shit!!!

I WOULD NEVER GO BACK THERE AGAIN!!!

 

[Makdaddy]

Holy shit!!!

I WOULD NEVER GO BACK THERE AGAIN!!!

Yea

Now I need to fix the clunking form the adjustable UCA

 

[Sky Render]

OHHHHHHHH

Stupid alignment shop

Kill. Kill. KILL...

Sent from my toilet using Tapatalk.

 

[ArizonaGT]

Yep, that'll do it. Check your tires to make sure they're not damaged.

 

[michael.konor]

did it pop prior to your alignment?

i'm pretty sure the spherical bearings went out on mine. J&M, as far as I remember, has a lifetime warranty on the plates. I just need to send them back.

Check your strut rod nuts (middle of plates, accessible through the engine bay).

Anyone have the phone number to J&M? Mine are doing the same thing.

 

[Mr. Q]

oh wow...what a horrible alignment shop. post pictures of what they did on yelp and everywhere locally. fukin newbs.